منابع مشابه
CORROSION RESISTANT SOL–GEL COATING ON 2024-T3 ALUMINUM
The inherent reactivity of the Al–Cu alloys is such that their use for structural, marine, and aerospace components and structures would not be possible without prior application of a corrosion resistance system. Historically these corrosion resistance coatings were based on the use of chemicals containing Cr (VI) compounds. Silane coatings are of increasing interest in industry due to th...
متن کاملHeat Transfer Enhancement by Nano Structured Carbon Nanotube Coating
The present work deals on the experimental investigation on the heat transfer and pressure drop characteristics of CNT coating on a stainless steel substrate in a rectangular macro channel with water as the working fluid. The experiments were conducted under both laminar and turbulent flow conditions with Reynolds number varying from 500-2600. The experimental results using an uncoated stainles...
متن کاملTHE OXIDATION RESISTANCE OF HIGH ALUMINUM HEAT RESISTANT STEELS
Abstract: In this research, the oxidation behaviour of high Aluminum heat resistant steel (%25Cr,%20Ni,%8Al) hasbeen evaluated at the temperature range of (1000-1300ºC).The results showed that there was no countinous healinglayer on the surface of the alloy when Al increased up to %5.5 and the oxidation resistance of steel decreased due toformation of spinel oxides on the surface.By increasing ...
متن کاملWear resistant solid lubricant coating made from PTFE and epoxy
A composite coating of polytetrafluoroethylene and epoxy shows 100 · improvements in wear resistance as compared to either of its constituents alone and reduced friction coefficient under testing on a pin-on-disk tribometer. This coating is made by impregnating an expanded PTFE film with epoxy, which provides three unique functions: (1) the epoxy compartmentalizes the PTFE nodes, which is belie...
متن کاملPolyethyleneimine coating renders polycarbonate resistant to organic solvents.
We propose a method for the modification of surfaces of microchannels in chips fabricated in polycarbonate (PC) that makes the devices resistant to a range of organic solvents. Coating of PC with branched polyethyleneimine (BPEI) with the use of trimethylpropane triglycidyl ether (TTE) as a linker renders the devices resistant to toluene, benzene, acetonitrile, tetrahydrofuran, dioxane and ethy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Colour Material
سال: 1979
ISSN: 0010-180X
DOI: 10.4011/shikizai1937.52.15