Heat transfer enhancement in the complex geometries filled with porous media

نویسندگان

چکیده

The present numerical investigation aims to analysis the enhancement heat transfer in nanofluid filled-complex geometries saturated with a partially layered porous medium. vertical walls of cavity are taken as complex wavy geometries. horizontal flat insulated temperature. is filled and upper half In analysis, governing equations formulated for natural convection under Boussinesq approximation various environments including pure-fluid, nanofluid, this investigation, effects Rayleigh number (103 ? Ra 105), Darcy parameter (10?6 Da 10?3), thermophoresis (0.1 Nt 0.5), buoyancy ratio Nr Brownian motion Nb inclination angle (0? 90?), geometry parameters ?1 R have been studied on streamlines, temperature, nanoparticles volume fraction, local Nusselt number, Sherwood number. It found that, performance can be improved by adjusting surface. Overall, results showed that enhance obtained provide useful insight enhancing two separate layers medium inside complex-wavy cavity.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Heat Transfer in Porous Media

In this work, the effects of electrical double layer (EDL) near the solid/ liquid interface, on three dimensional heat transfer characteristic and pressure drop of water flow through a rectangular microchannel numerically are investigated. An additional body force originating from the existence of EDL is considered to modify the conventional Navier-stokes and energy equations. These modified eq...

متن کامل

A Numerical Modeling for Natural Convection Heat Transfer in Porous Media With Generated Internal Heat Sources

In this paper a numerical method is used to study the unsteady state natural convection heat transfer within a confined porous media with uniform internal heat generation. The governing equations based on the Darcy model and Bossiness approximations are solved, using the finite difference Alternating Direction Implicit (ADI) method. The developed program was used to simulate natural convection ...

متن کامل

Forced Convective Heat Transfer Enhancement in a Tube with its Core Partially Filled with a Porous Medium

Forced convection in a tube with its core partially filled with a porous medium is treated both analytically and numerically to find its high heat transfer performance. Assuming a fully developed flow subject to a constant heat flux, both friction factor and Nusselt number are presented explicitly as functions of the Reynolds number, Darcy number and porous core diameter ratio. Partial filling ...

متن کامل

Simplified Correlation Equations of Heat Transfer Coefficient During Phase Change Flow Inside Tubes Filled with Porous Media

In this work an easy to use, simple and direct equations were formulated and tested. Heat transfer coefficients of phase change fluid flow were examined in this work. The considered fluid flow encountered convection heat flux inside rigid tubes filled with porous media. During the flow, phase change was assumed. Experimental work was conducted using Carbon dioxide as fluid. An analytical method...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Thermal Science

سال: 2021

ISSN: ['0354-9836', '2334-7163']

DOI: https://doi.org/10.2298/tsci181218166r