Heat transfer of swirling impinging jets ejected from Nozzles with twisted tapes utilizing CFD technique
نویسندگان
چکیده
منابع مشابه
Heat Transfer Characteristics of Swirling Impinging Jets
Impinging jets are used in a wide number of industrial cooling applications due to their high heat and mass transfer abilities. The current research is concerned with the effect of swirl on the heat transfer characteristics of jet impingement cooling. Two inserts were designed order to generate swirling flow. These two designs, “Swirl Insert A” and “Swirl Insert B”, were tested at various Reyno...
متن کاملCFD analysis of natural convection heat transfer in a square cavity with partitions utilizing Al2O3 nanofluid
In the present study, natural convective heat transfer in a partitioned square cavity utilizing nanofluids is studied. The vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed to be adiabatic. The nanofluid used in this study is Al2O3 with the volume fraction of 20%. It is assumed that nanofluid is a single phase f...
متن کاملCFD analysis of natural convection heat transfer in a square cavity with partitions utilizing Al2O3 nanofluid
In the present study, natural convective heat transfer in a partitioned square cavity utilizing nanofluids is studied. The vertical left and right walls are considered as the hot and cold walls, respectively and the partitions assumed to be adiabatic. The nanofluid used in this study is Al2O3 with the volume fraction of 20%. It is assumed that nanofluid is a single phase f...
متن کاملHeat Transfer under Double Turbulent Pulsating Jets Impinging on a Flat Surface
In this study, the numerical analysis of turbulent flow and heat transfer of double pulsating impinging jets on a flat surface has been investigated. The unsteady two-dimensional numerical solution for two similar and dissimilar jets was performed using the RNG k-ε model. The results showed that the RNG k-ε model has more satisfactory predictions of the Nusselt number distribution. Comparisons ...
متن کاملCalibration of CFD Model for Mist/Steam Impinging Jets Cooling
In the heavy-frame advanced turbine systems, steam is used as a coolant for turbine blade cooling. The concept of injecting mist into the impinging jets of steam was experimentally proved as an effective way of significantly enhancing the cooling effectiveness in the laboratory under low pressure and temperature conditions. However, whether mist/steam cooling is applicable under actual gas turb...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Case Studies in Thermal Engineering
سال: 2015
ISSN: 2214-157X
DOI: 10.1016/j.csite.2015.08.001