Heat Transfer Simulation in a High Temperature Solar Reactor
نویسندگان
چکیده
منابع مشابه
Prediction of the Thermal Parameters of a High-Temperature Metallurgical Reactor Using Inverse Heat Transfer
Abstract—This study presents an inverse analysis for predicting the thermal conductivities and the heat flux of a high-temperature metallurgical reactor simultaneously. Once these thermal parameters are predicted, the time-varying thickness of the protective phasechange bank that covers the inside surface of the brick walls of a metallurgical reactor can be calculated. The enthalpy method is us...
متن کاملA diffusion-based approximate model for radiation heat transfer in a solar thermochemical reactor
An approximate method for fast calculations of the radiation heat transfer in a solar thermochemical reactor cavity is proposed. The two-step method with separate calculations for solar and thermal radiation is based on the diffusion approach. The usual P1 approximation is generalized by use of an equivalent radiation diffusion coefficient for the optically thin central part of the cavity. The ...
متن کاملPassive Decay Heat Removal for the Advanced High Temperature Reactor
This report presents a design concept for a high-capacity decay-heat removal system for the molten-salt cooled Advanced High Temperature Reactor (AHTR) [1]. The design is closely derived from the General Electric S-PRISM reactor, which is a sodium pooltype reactor [2]. The AHTR is distinguished from the S-PRISM by its use of a hightemperature thermal blanket, shown in Fig.1, that allows the ves...
متن کاملSimulation Analysis of Passive Solar Structures Using Heat Transfer Equations
Passive solar design is an economical way of using solar energy in buildings. The thermal behavior of the buildings within its environment over a period of time can easily be predicted using accurate and simple analytical tools. This provides designers the information necessary to satisfy the occupant’s needs, reduce peak cooling/heating power demands, reduce the size of air conditioning/heatin...
متن کاملSimulation Heat Transfer Fluid Efficiency and Molten Salts in Heat Collecting Elements in Concentrating Solar Power
In this work, we simulate the efficiency of different Heat Transfer Fluids (HTF) and molten salts when circulating through a section of Heat Collecting Elements (HCE) in a parabolic trough system for Concentrating Solar Power (CSP). The simulation shows that the Therminol VP-1 and Dowtherm A synthetic oils are the most efficient in the solar field due to their broad range of working temperature...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2015
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2015.03.154