Heat Treated NiP–SiC Composite Coatings: Elaboration and Tribocorrosion Behaviour in NaCl Solution
نویسندگان
چکیده
منابع مشابه
Effect of Micro Glass Flake on Morphological and Rheological Behaviour of Epoxy Vinyl Ester Composite Coatings
In the present work, attempts were made to investigate the reinforcement and treatment effect of GF on morphological and rheological behaviour of GF/epoxy vinyl ester composites. GF was incorporated into epoxy vinyl ester resin by sonication, and mechanical agitation. Rheological and morphological properties were studied as a function of particle treatment and size distributions. The dispersion...
متن کاملTEM and STEM analysis on heat-treated and in vitro plasma-sprayed hydroxyapatite/Ti-6Al-4V composite coatings.
A cogent understanding of the microstructure, and indeed nano-structure, of hydroxyapatite (HA) and the interface between Ti-6Al-4V and HA is crucial to its appropriateness as a biomaterials. This paper reports the analysis of plasma-sprayed HA/Ti-6Al-4V composites by transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) to elucidate the intricate nature of...
متن کاملCORROSION BEHAVIOUR OF A 2219 ALUMINIUM ALLOY TREATED WITH A CHROMATE CONVERSION COATING EXPOSED TO A 3.5 % NaCl SOLUTION
This study investigates the formation of a chromate conversion coating at Al-Cu-Fe-Mn intermetallic sites of an Al2219 alloy and the corrosion initiation at these sites in a 3.5 % NaCl solution, using SEM, AES and EDX. Changes in the surface chemistry were monitored after progressive exposures to the solution up to 42 hours. The coating was found to be thinner and more defective on the intermet...
متن کاملTiO2 nano-particle effect on the chemical and physical properties of Ni-P-TiO2 nanocomposite electroless coatings
TiO2 nano-particles were used in electroless plating bath to obtain Ni/P/nano-composite coatings. The coatings were heat treated at 200, 400, 600 and 700 oC and their chemical and physical properties were investigated and it was found that 400 oC was the optimum temperature for the heat treatment of the coatings. The micro-hardness test of coatings showed that t...
متن کاملInvestigation on the corrosion behaviour of 420 welding martensitic steel with the ER308L, ER309L and ER420 fillers studied in 3.5% NaCl solution with and without CO2
In this research 420 martensitic stainless steel welded with the ER308L, ER309L and ER420 fillers by GTAW method. The corrosion properties of the samples has been studied in 3.5% NaCl solution with and without CO2. Potentiodynamic polarization used to obtain the ER308L and ER309L have the best corrosion properties. In addition the welding process makes the 420 HAZ zone to be sensitized. The pi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tribology Letters
سال: 2009
ISSN: 1023-8883,1573-2711
DOI: 10.1007/s11249-009-9471-1