Heat Treatment of Low Cost Beta Titanium Alloy Produced by Investment Casting
نویسندگان
چکیده
منابع مشابه
Modeling of TiAl Alloy Grating by Investment Casting
The investment casting of TiAl alloys has become the most promising cost-effective technique for manufacturing TiAl components. This study aimed to investigate a series of problems associated with the investment casting of TiAl alloys. The mold filling and solidification of this casting model were numerically simulated using ProCAST. Shrinkage porosity was quantitatively predicted by a built-in...
متن کاملPlatinum Investment Casting , Part II : Alloy
Two widely used jewellery investment casting alloys (platinum with 5 wt% ruthenium (Pt-5Ru) and platinum with 5 wt% cobalt (Pt-5Co)) suffer from poor castability and other drawbacks. In this work thermodynamic calculations of alloy properties were employed to optimise the alloy compositions. Segregation behaviour appeared to be important for the melting range. Scheil simulations were used to si...
متن کاملA low-cost hierarchical nanostructured beta-titanium alloy with high strength
Lightweighting of automobiles by use of novel low-cost, high strength-to-weight ratio structural materials can reduce the consumption of fossil fuels and in turn CO2 emission. Working towards this goal we achieved high strength in a low cost β-titanium alloy, Ti-1Al-8V-5Fe (Ti185), by hierarchical nanostructure consisting of homogenous distribution of micron-scale and nanoscale α-phase precipit...
متن کاملReaction of cobalt-chromium casting alloy with investment.
REACTION DE ALLIGATO FUSIONAL DE COBALT E CHROMO CON INVESTIMENTO.-Alterationes chimic occurrente intra le investimento ligate a phosphate durante le prisa e le cocer esseva determinate per technicas a diffraction de radios X. Es postulate le occurrentia de certe reactiones durante le processo. Tests del resistentia al compression effectuate a varie temperatures corroborava ille postulates. Ess...
متن کامل[Mechanical studies on casting titanium alloy denture base].
The mechanical properties of the Akers type clasp, bar and frame made by the newly developed Ti-20Cr-0.2Si alloy were studied in order to obtain the indices for designing the cast partial denture base. In the case of the clasp, the bending strength of the Ti-20Cr-0.2Si alloy and pure Ti was lower than that of the Co-Cr alloy. The Ti-20Cr-0.2Si alloy and pure Ti may have the same retentive force...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Petroleum and Mining Engineering
سال: 2020
ISSN: 2682-3292
DOI: 10.21608/jpme.2020.24287.1027