High and Low Temperature Properties of FT-Paraffin-Modified Bitumen
نویسندگان
چکیده
منابع مشابه
Rheological properties of modified Bitumen: Comparison of waste polymers’ performance
In this investigation, rheological properties of three different polymer-modified bitumen compounds containing recycled polyethylene terephthalate (R-PET), crumb rubber (CR) and poly (styrene-butadiene-styrene) (SBS) are evaluated and compared. The modified samples were tested by a dynamic shear rheometer (DSR) where complex modulus (G*), phase angle (δ) and rutting resistance (G*/Sinδ) of spec...
متن کاملInvestigating the Rheological Properties of Crumb Rubber Modified Bitumen and its Correlation with Temperature Susceptibility
There is substantial evidence on the advantages of using crumb rubber in enhancing conventional bitumen properties, gaining environmental protection and boosting industrial-economical benefits. Thus, the use of this ingenious additive in bitumen modification through sustainable technology is highly advocated.The main objective of this research is to investigate the effects of different blending...
متن کاملOptical and UV-Aging Properties of LDH-Modified Bitumen
Layered double hydroxides (LDHs) are an ultraviolet-light (UV) resistant material. In this study, LDHs were used to modify bitumen. The optical and UV aging properties of LDHs modified bitumen were investigated. Firstly, the thin films of bitumen, with and without LDHs, were prepared. By using the UV-Vis spectrophotometer, absorbance, reflectance, and transmittance of bituminous thin film were ...
متن کاملHIGH TEMPERATURE ELASTIC PROPERTIES OF REFRACTORY MATERIALS
Abstract: A pulse-echo technique, based on ultrasonic "long-bar" mode (LBM) velocity measurements, working up to 1700°C is described. Magnetostrictive transducers and ultrasonic lines used in a 40-85 kHz frequency range are detailed. The conditions of choice of fundamental parameters (frequency, line geometry, sample size) are discussed in relation with the nature and the microstructure of ...
متن کاملInvestigation of influences of alloying elements and sintering temperature on the properties of high strength low alloyed sintered steel
Producing parts with high density and improved mechanical properties is one of the most important aims of powder metallurgy process. There are many factors for attaining modified properties in sintered parts but among them controlling type and quantity of alloying elements and manufacturing parameters such as compacting pressure, sintering temperature are the most effective. In this research, t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advances in Materials Science and Engineering
سال: 2012
ISSN: 1687-8434,1687-8442
DOI: 10.1155/2012/406791