High Complicated Shaping and Functionalizing the Powder Compacts by Laser Sintering
نویسندگان
چکیده
منابع مشابه
Sintering and Foaming of Barium Silicate Glass Powder Compacts
The manufacture of sintered glasses and glass-ceramics, glass matrix composites, and glass-bounded ceramics or pastes is often affected by gas bubble formation. Against this background, we studied sintering and foaming of barium silicate glass powders used as SOFC sealants using different powder milling procedures. Sintering was measured by means of heating microscopy backed up by XPD, differen...
متن کاملLubricant Pyrolysis During Sintering of Powder Metallurgy Compacts
The chemistry surrounding the pyrolysis of N,NЈ-ethylenebisstearimide (EBS) compacted with iron powder is described for the first time. Heat treatment is carried out in a 5 vol pct hydrogen atmosphere (balance nitrogen) over the 100 °C to 850 °C range. The exhaust from the furnace is monitored by Fourier transform infrared and dispersive ultraviolet absorption spectroscopy; condensable material...
متن کاملMicrostructural evolution of mullite during the sintering of kaolin powder compacts
Kaolin particles are usually ̄aky in shape. In the present study, kaolin powder compacts were prepared by applying the diepressing technique. The kaolin ̄akes tend to lie down on the plane which is perpendicular to the die-pressing direction. The powder compact thus shows anisotropic shrinkage after ®ring. A series of phase transformations take place as the kaolin is ®red at elevated temperatur...
متن کامل9finite Element Analysis on the Sintering of Stainless Steeel 316l Powder Compacts
Implementation of an accurate sintering model into a finite element simulation program can significantly improve Powder Metallurgy (P/M) part properties and processing efficiency. The densification and creep behavior of stainless steel powders during free sintering has been simulated and the material model has been implemented by linking user subroutines to the ABAQUS finite element code. This ...
متن کاملExperimental Investigation of Effective Parameters at Laser Sintering the Mixture of Iron and Copper Powder
Optimization of process parameter is one of the ideal goals in laser sintering. The results of this process were measured as output parameters like: density, micro hardening, macro hardening, tension, roughness, stiffness, balling. In this paper, the influence of input parameter such as laser power, scan speed, material powder and etc are surveyed on output parameter like balling affection and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Hosokawa Powder Technology Foundation ANNUAL REPORT
سال: 2006
ISSN: 2189-4663
DOI: 10.14356/hptf.03104