High-Densification for Ferrous Soft Magnetic Powder by Metal Injection Molding - 2nd Report
نویسندگان
چکیده
منابع مشابه
Progress in Titanium Metal Powder Injection Molding
Metal powder injection molding is a shaping technology that has achieved solid scientific underpinnings. It is from this science base that recent progress has occurred in titanium powder injection molding. Much of the progress awaited development of the required particles with specific characteristics of particle size, particle shape, and purity. The production of titanium components by injecti...
متن کاملOutstanding features of powder injection molding for micro parts manufacturing
When powder injection molding first appeared on the market, it was very well received for the potential it offered. However, the market did not grow as expected at that time. In recent years, the perseverance of manufacturers in this field has borne fruit, and today, the market is about 10 billion yen. However, looking at the market, one is still painfully aware of how low its recognition remai...
متن کاملSimulation and modeling of macro and micro components produced by powder injection molding: A review
During the recent years powder processing technologies have gained much attention due to the less energy consumption and recyclable powders. Manufacturing of complicated parts by the conventional powder metallurgy (PM) method is hard due to the uniaxial pressure, which leads to the low design flexibility. In order to prevail these constraints, powder injection molding (PIM) process, which inclu...
متن کاملMicrostructure and mechanical properties of titanium components fabricated by a new powder injection molding technique
A powder injection molding (PIM) binder system has been developed for reactive metals such as titanium that employs an aromatic compound as the primary component to facilitate easy binder removal and mitigate problems with carbon contamination. In the study presented here, we examined the densification behavior, microstructure, and mechanical properties of titanium specimens formed by this proc...
متن کاملMicrostructure and Mechanical Properties of Inconel 625 and 7 18 Alloys Processed by Powder Injection Molding
Powder injection molding of superalloys offer a potential route for the manufacture of small and geometrically complex components for the aircraft engine industry. In this investigation, 625 and 718 alloy powders with an average size below 10 pm were injection molded into tensile test bars which were then sintered in a hydrogen atmosphere at diverse temperatures after debinding. Other 718 alloy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 2010
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.57.387