High Energy Rate Fabrication
نویسندگان
چکیده
منابع مشابه
High Energy Implanted Transistor Fabrication*
High energy ion implantation forms, together with submicron lithography, trench technology, rapid thermal multiprocessing and simulation programs, are a powerful means of fabricating the tiny transistor structures of the future. Several crosssections of silicon devices, some of which are already known from the literature, are discussed. The benefits of implantations at energies between 200 and ...
متن کاملFabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering
Spark plasma sintering (SPS) is a sintering process that is capable of sintering hard worked powders in short times. This technique was used to fabricate bulk Cu and Cu-SiC nanocomposites. Pure Cu and mixed powders of Cu including 4 vol% of SiC nanoparticles were mechanically alloyed for 25 h and sintered at 750˚C under vacuum condition by SPS method. Microstructures of the materials were chara...
متن کاملFabrication of silicon microstructures using a high energy ion beam
We report an alternative technique which utilizes fast proton or helium ion irradiation prior to electrochemical etching for three-dimensional micro-fabrication in bulk p-type silicon. The ion-induced damage increases the resistivity of the irradiated regions and slows down porous silicon formation. A raised structure of the scanned area is left behind after removal of the un-irradiated regions...
متن کاملDesign and Fabrication of Advanced Hybrid Circuits for High Energy
Current design and fabrication techniques of hybrid devices are explained for the Drift Chamber and the Liquid Ar-pon Calorimeter for the Stanford Linear Collider Large Detector (SLD) at SLAC. Methods of developing layouts, raging from hand-cut templates to advanced designs utilizing CAD tools with special hybrid design software were applied. Physical and electrical design rules for good yield ...
متن کاملLow repetition rate high energy 1.5 µm fiber laser.
In this paper, we report, for the first time, that by modulating pump beam to suppress ASE effect we realized ultra-low repetition rate output in an all fiber based Er:Yb codoped master oscillator power amplifiers (MOPA) system. Combined with pulse shaping technology, pulses with up to 205 µJ pulse energy and 200 ns pulse duration were obtained at Hz level.
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Pressure Vessel Technology
سال: 1985
ISSN: 0094-9930,1528-8978
DOI: 10.1115/1.3264415