High Frequency Composite Transmission Lines.
نویسندگان
چکیده
منابع مشابه
Transmission Lines for High Frequency and High [)ensity Packaging
CA91 108 We report on resistivity and chemical stability of Cr/Au bilayers deposited by sputtering on three kinds of substrates: alumina, aluminum nitride and aluminum nitride coated alumina. The insertion loss of Cr/Au microstrip lines fabricated on these three substrates was low and stable after 700 cycles in the -65°C to 125°C temperature range.
متن کاملPhase Frequency Detector Using Transmission Gates for High Speed Applications
In this paper a new phase-frequency detector is proposed using transmission gates which can detect phase difference less than 500ps. In other word, the proposed Phase-frequency Detector (PFD) can work in frequencies higher than 1.7 GHz, whereas a conventional PFD operates at frequencies less than 1.1 GHz. This new architecture is designed in TSMC 0.13um CMOS Technology. Also, the proposed PFD a...
متن کاملDistributed Amplifiers with Composite Left/right-handed Transmission Lines
The use of so-called “composite left/right-handed transmission lines” in the design of distributed amplifiers is discussed using a simple model for the active device. The simplified analysis performed herein shows that it is possible to modify the frequency response of forward and reverse power gains, a significant development which could lead to innovative distributed amplifier designs. © 2006...
متن کاملTransmission Lines Transmission Lines Fabric Port
We describe our experiences verifying real communications hardware using machine-assisted proof. In particular we re ect on the errors found, problems encountered and the bottlenecks that slowed the progress of the proofs. We also note techniques which would alleviate the problems. Most of the problems we discuss only become signi cant when large designs are veri ed.
متن کاملTransmission expansion planning based on merchandizing surplus of transmission lines
This paper proposes an optimal transmission expansion planning (TEP) which is based on determining share of each line in merchandizing surplus (MS) of system, determining by Independent System Operator (ISO). The more share of a line in MS of system denotes the priority of a line for expansion. The procedure of determining MS of each line in a power system is based on determining the MS share o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of the Institute of Television Engineers of Japan
سال: 1964
ISSN: 1884-9644
DOI: 10.3169/itej1954.18.288