High-Input Impedance Voltage-Mode Multifunction Filter
نویسندگان
چکیده
This paper proposes a high-input impedance voltage-mode (VM) multifunction biquad filter which employs three current-feedback amplifiers (CFAs), resistors, and two grounded capacitors. The proposed VM has single-input triple-output can realize non-inverting low-pass (NLP), inverting band-pass (IBP), band-stop (NBS) voltage responses at the same time without increasing component selection. enjoys orthogonal tunability of angular frequency quality factor also provides advantage using only capacitors, low active/passive sensitivity. performance is verified through its hardware implementation OrCAD PSpice simulation based on AD844-type CFAs. circuit analysis, sensitivity NLP, IBP, NBS are shown in this paper. presents method to effectively reduce active passive components, maintain good performance, costs.
منابع مشابه
High-Input Impedance Voltage-Mode Multifunction Filter Using a Single DDCCTA and Grounded Passive Elements
In this paper, a novel single-input three-output (SITO) second-order multifunction active voltage filter with high-input impedance is proposed. The proposed circuit is based on using the recently reported active building block, namely differential difference current conveyor transconductance amplifier (DDCCTA). It employs one DDCCTA as active element together with one grounded resistor and two ...
متن کاملHigh output impedance current-mode multifunction filter using FTFNs
A new current-mode (CM) single input three outputs (SITO) multifunction filter topology is presented, which employs only three FTFNs or OFAs and five passive elements. From this topology, two filter circuits can be derived selecting the passive elements properly. The proposed filter realizes three filter functions simultaneously all at high impedance outputs. No component matching is required a...
متن کاملHigh performance voltage – mode multifunction filter with minimum component count
This paper presents a new second order multifunction filter using one active element, requiring only ‘twelve’ CMOS transistors, and four passive elements. The proposed circuit realizes voltage-mode low-pass, high-pass and band-pass functions with the advantages of minimum component count structure, high Q possibility, and high frequency potential. The proposed circuit is verified through PSPICE...
متن کاملIndependently tunable high-input impedance voltage-mode universal biquadratic filter using grounded passive components
This paper presents an independently tunable high-input impedance voltage-mode universal biquadratic filter using one plus-type second-generation current conveyor (CCII+), one full differential current conveyor (FDCCII), two grounded capacitors and three grounded resistors which can realize voltage-mode universal filtering responses (lowpass, highpass, bandpass, notch and allpass) from the same...
متن کاملHigh Input Impedance Voltage-Mode Universal Biquadratic Filter with Three Inputs Using DDCCs
A new high input impedance voltage-mode universal biquadratic filter with three input terminals and five output terminals is presented. The proposed circuit uses three plus-type differential difference current conveyors, two grounded resistors and two grounded capacitors. The proposed circuit can realize all the standard filter functions: lowpass, bandpass, highpass, notch and allpass, without ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied sciences
سال: 2021
ISSN: ['2076-3417']
DOI: https://doi.org/10.3390/app11010387