High-loading lateral Li deposition realized by a Scalable Fluorocarbon Bonded Laminates
نویسندگان
چکیده
منابع مشابه
Experimental investigation of reinforced bonded joints for composite laminates
An experimental study has been carried out to investigate the behaviour of co-bonded carbon fibre reinforced plastics joints with a novel design incorporating a through the thickness local reinforcement. Different specimens were manufactured to investigate static and fatigue behaviour, as well as delamination size after impact and damage tolerance characteristics. The mechanical performances of...
متن کاملAnalysis of Cracks in Adhesively Bonded Metallic Laminates by a 3-dimensional Assumed Stress Hybrid Fem
A three-dimensional analysis of cracks in adhesively bonded laminates, with debonding around the crack, is presented. The three-dimensional finite element method is based on a hybrid-stress procedure. Effects of the following parametricvariations are studied: (i) relative thicknesses of adhesives, (ii) relative material properties of adhesives and adherends, (iii) ratio of flaw length, to lamin...
متن کاملCentrifuge modelling of long piles subjected to lateral loading with high load eccentricity in sand
In this research paper, five centrifuge lateral loading tests of long piles with a considerable load eccentricity were carried out in the sand to investigate the impacts of the load eccentricity and pile length changes on the lateral behavior of a flexible pile beside the determination of experimental p-y curves. Comparing experimental test results with the recommended API (American Petroleum ...
متن کاملPolymeric Fluorocarbon Films via Hot-Filament Chemical Vapor Deposition
Hot Filament Chemical Vapor Deposition (HFCVD) offers the ability to tailor the chemistry of films with polymeric structure. In particular, HFCVD allows for more control over precursor fragmentation pathways than conventional plasma-enhanced CVD (PECVD). HFCVD uses thermal activation in the gas phase to generate reactive species, and allows independent control of the substrate temperature to be...
متن کاملLi-rich Thin Film Cathode Prepared by Pulsed Laser Deposition
Li-rich layer-structured cathode thin films are prepared by pulsed laser deposition. X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), X-ray photoelectron spectroscopy (XPS) and electrochemical testing in half battery cells are used to characterize crystal structure, surface morphology, chemical valence states and electrochemical performance of these thin films, resp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Carbon
سال: 2021
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2020.09.061