High-optical power
نویسندگان
چکیده
منابع مشابه
emittance control in high power linacs
چکیده این پایان نامه به بررسی اثر سیم پیچ مغناطیسی و کاوه یِ خوشه گر با بسامد رادیویی بر هاله و بیرونگراییِ باریکه هایِ پیوسته و خوشه ایِ ذرات باردار در شتابدهنده های خطیِ یونی، پروتونی با جریان بالا می پردازد و راه حل هایی برای بهینه نگهداشتن این کمیتها ارایه می دهد. بیرونگرایی یکی از کمیتهای اساسی باریکه هایِ ذرات باردار در شتابدهنده ها است که تاثیر قابل توجهی بر قیمت، هزینه و کاراییِ هر شتابدهند...
Optical Fiber for High-Power Optical Communication
We examined optical fibers suitable for avoiding such problems as the fiber fuse phenomenon and failures at bends with a high power input. We found that the threshold power for fiber fuse propagation in photonic crystal fiber (PCF) and hole-assisted fiber (HAF) can exceed 18 W, which is more than 10 times that in conventional single-mode fiber (SMF). We considered this high threshold power in P...
متن کاملMeasuring temperature profiles in high-power optical fiber components.
We demonstrate a new method for measuring changes in temperature distribution caused by coupling a high-power laser beam into an optical fiber and by splicing two fibers. The measurement technique is based on interrogating a fiber Bragg grating by using low-coherence spectral interferometry. A large temperature change is found owing to coupling of a high-power laser into a multimode fiber and t...
متن کاملThermo-optical effects in high-power ytterbium-doped fiber amplifiers.
We investigate the effect of temperature gradients in high-power Yb-doped fiber amplifiers by a numerical beam propagation model, which takes thermal effects into account in a self-consistent way. The thermally induced change in the refractive index of the fiber leads to a thermal lensing effect, which decreases the effective mode area. Furthermore, it is demonstrated that the thermal lensing e...
متن کاملCatastrophic optical damage of high power InGaAs/AlGaAs laser diodes
The defects generated by the catastrophic optical degradation (COD) of high power laser diodes have been examined using cathodoluminescence (CL). Discontinuous dark lines that correspond to different levels of damage have been observed along the ridge. Finite element methods have been applied to solve a physical model for the degradation of the diodes that explicitly considers the thermal and m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nature Photonics
سال: 2013
ISSN: 1749-4885,1749-4893
DOI: 10.1038/nphoton.2013.298