High-performance iodine fiber frequency standard
نویسندگان
چکیده
منابع مشابه
High-performance iodine fiber frequency standard.
We have constructed a compact and robust optical frequency standard based around iodine vapor loaded into the core of a hollow-core photonic crystal fiber (HC-PCF). A 532 nm laser was frequency locked to one hyperfine component of the R(56) 32-0 (127)I(2) transition using modulation transfer spectroscopy. The stabilized laser demonstrated a frequency stability of 2.3×10(-12) at 1 s, almost an o...
متن کاملHigh-Power Single-Frequency Fiber Lasers
Single frequency laser sources are desired in many applications. Various architectures for achieving high power single frequency fiber laser outputs have been investigated and demonstrated. Axial gain apodization can affect the lasing threshold and spectral modal discrimination of DFB lasers. Modeling results show that if properly tailored, the lasing threshold can be reduced by 21% without sac...
متن کاملDesign Techniques for High Performance Intgrated Frequency Synthesizers for Multi-standard Wireless Communication Applications
1 The growing importance of wireless media for voice and data communications is driving a need for higher integration in personal communications transceivers in order to achieve lower cost, smaller form factor, and lower power dissipation. One approach to this problem is to integrate the RF functionality in low-cost CMOS technology together with the baseband transceiver functions. This in turn ...
متن کاملAbsolute-Frequency Measurement of the Iodine-Based Length Standard at 514.67 nm
The absolute frequency of the length standard at 514.67 nm based on the molecular iodine ( I2) transition of the P(13) 43-0 component a3 is measured using a self-referenced femtosecond optical comb. This frequency-based technique improves measurement precision more than 100 times compared with previous wavelength-based results. Powerand pressure-related frequency shifts have been carefully stud...
متن کاملHigh Homogeneity Solenoidal Magnet for Cesium Frequency Standard
In Cs frequency standards a zone of highly uniform magnetic flus density, lower in value of 0.1 T, is required The magnetic homogeneity value is tied to the overall accuracy of the standard and, for an accuracy of a design value 1 p.p.m. is required. For this purpose a resistive solenoid 700 mm long with a bore radius of 32.5 mm has been designed and built. This paper reports the design process...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Letters
سال: 2011
ISSN: 0146-9592,1539-4794
DOI: 10.1364/ol.36.004776