High-Performance Photocatalytic Cementitious Materials Containing Synthetic Fibers and Shrinkage-Reducing Admixture
نویسندگان
چکیده
منابع مشابه
Flexural Behavior of Cementitious Composites Reinforced by Synthetic Fibers
The application of fibers to reinforce cementitious materials is a well-known subject. At first, asbestos fibers are used in industrial process to produce fiber reinforced cement sheets. Thereafter, various types of synthetic fibers are produced and used as asbestos substitutes. The aim of the present work is to evaluate the effect of synthetic fibers on the flexural behavior of cementitious co...
متن کاملExperimental investigation and prediction of compressive strength of ultra- high performance concrete containing supplementary cementitious materials
Ultra-high-performance concrete (UHPC) has superior mechanical properties and durability to normal strength concrete. However, the high amount of cement, high environmental impact and initial cost are regarded as disadvantages, restricting its wider application. Incorporation of supplementary cementitious materials (SCMs) in UHPC is an effective way to reduce the amount of cement needed while c...
متن کاملExperimental investigation of mechanical and dynamic impact properties of high strength cementitious composite containing micro steel and PP fibers
Cementitious composites are one of the most consumed construction materials in the world. The use of cementitious composites is increasing due to their special characteristics. The behavior of high strength cementitious composites is improved by increasing the fiber percentage. In the present paper, the effects of steel microfibers and polypropylene fibers on mechanical properties and impact re...
متن کاملFigure of merit for the thermal performance of cementitious composites containing phase change materials
This paper presents a novel method to quantitatively characterize the thermal performance of composite materials containing phase change materials (PCM) based on a figure of merit we termed the energy indicator. The method features (i) commonly used specimen geometry, (ii) straightforward experimental implementation, and (iii) sensitivity to relevant design parameters including PCM volume fract...
متن کاملExpansion and shrinkage of fibers
Introduction Fibers are produced worldwide in enormous quantities. More than 20 million tons of synthetic fibers and 20 million tons of natural fibers are manufactured each year. The total length of these fibers corresponds to about 10 000 times the distance from the earth to the sun. A characteristic feature of a fiber is that its length is much greater than its diameter. The great anisotropy ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma13081828