High Performance Polyamide 6 Fibers Using Polycarbonate Based Thermoplastic Polyurethane Thin Film Coatings- a Novel Method
نویسندگان
چکیده
منابع مشابه
Absorbing TiOx thin film enabling laser welding of polyurethane membranes and polyamide fibers
We report on the optical properties of thin titanium suboxide (TiO x ) films for applications in laser transmission welding of polymers. Non-absorbing fibers were coated with TiO x coatings by reactive magnetron sputtering. Plasma process parameters influencing the chemical composition and morphology of the deposited thin films were investigated in order to optimize their absorption properties....
متن کاملA Novel Approach Toward Fabrication of High Performance Thin Film Composite Polyamide Membranes.
A practical method is reported to enhance water permeability of thin film composite (TFC) polyamide (PA) membranes by decreasing the thickness of the selective PA layer. The composite membranes were prepared by interfacial polymerization (IP) reaction between meta-phenylene diamine (MPD)-aqueous and trimesoyl chloride (TMC)-organic solvents at the surface of polyethersulfone (PES) microporous s...
متن کاملFlexible Tactile Sensor Using Polyurethane Thin Film
A novel capacitive tactile sensor using a polyurethane thin film is proposed in this paper. In previous studies, capacitive tactile sensors generally had an air gap between two electrodes in order to enhance the sensitivity. In this study, there is only polyurethane thin film and no air gap between the electrodes. The sensitivity of this sensor is higher than the previous capacitive tactile sen...
متن کاملSynthesis of bio-based thermoplastic polyurethane elastomers containing isosorbide and polycarbonate diol and their biocompatible properties.
A new family of highly elastic polyurethanes (PUs) partially based on renewable isosorbide were prepared by reacting hexamethylene diisocyanate with a various ratios of isosorbide and polycarbonate diol 2000 (PCD) via a one-step bulk condensation polymerization without catalyst. The influence of the isorsorbide/PCD ratio on the properties of the PU was evaluated. The successful synthesis of the...
متن کاملNovel method for the synthesis of thin film coatings on particulate materials
In this paper, we show the feasibility of the pulsed-laser ablation technique to grow 20–30-nm-thick, discrete and continuous coatings on particulate material systems so that the properties of the core particles can be suitably modified. Experiments were conducted with a pulsed excimer laser (l 4 248 nm, pulse duration 4 25 ns) to deposit nanoparticle coatings on Al2O3 and SiO2 core particles b...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Journal
سال: 2009
ISSN: 1349-0540,0032-3896
DOI: 10.1295/polymj.pj2008286