High Power Examinations of rf Window Materials.
نویسندگان
چکیده
منابع مشابه
A High-power L-band Rf Window*
This paper discusses the design, fabrication and testing of a high power alumina disk window in WR1500 waveguide at L Band, suitable for use in the NLC damping ring RF cavities at 714 MHz and the LEDA Accelerator at 700 MHz. The design is based on the fabrication methods used for the successful PEP-II cavity windows. Four prototype windows at 700 MHz have been produced by LBNL for testing at LA...
متن کاملRf, Thermal and Structural Analysis of a High Power Cw Rf Window
The present Jefferson Lab Free Electron Laser window requirements were used to develop a RF window design. These requirements include 1.497 GHz as the design frequency, and require the window to pass higher modes that originate in the cavity. The VSWR should be less than 1.1:1 at the design frequency and no greater than 1.5:1 at frequencies up to 2.2 GHz. The finite element method was used with...
متن کاملInvestigation of Using Ferroelectric Materials in High Power Fast Rf Phase Shifters for Rf Vector Modulation*
A fast ferroelectric phase shifter controlled by an electric field bias is being investigated for high-power fast RF phase shifters to be used for vector modulation. Such a device could find applications in particle accelerators, allowing vector control of the RF power divided and delivered to accelerating cavities from a power amplifier. Bulk ferroelectric materials, particularly those based o...
متن کاملHigh Temperature, High Power RF Life Testing of GaN on SiC RF Power Transistors
As GaN power device technology matures and gains acceptance in the market place, suppliers who provide products using this promising technology must prove its reliability. This paper will provide an overview of the testing approaches used to establish failure rates and will provide a comparison of DC and RF based HTOL methods. The primary focus of this paper will be the high power RF HTOL test ...
متن کاملHigh Power Rf Window and Waveguide Component. Development and Testing above 100 Mw at X-band
SLAC is committed to developing an X-band source _ capable of producing 100~MW, I-ps pulses to power the next linear collider [3]. The fust experience encountered at -, -SEAC in the X-band regime above a few megawatts was in the relativistic klystron program in cooperation with LLNL and LBL [2]. About 280 MW had been transmitted through a variety of waveguide components but at very short pulse ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: SHINKU
سال: 1992
ISSN: 0559-8516,1880-9413
DOI: 10.3131/jvsj.35.381