High pressure high temperature devitrification of Fe78B13Si9 metallic glass with simultaneous x-ray structural characterization

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

High Pressure-High Temperature, X-Ray Diffraction Apparatus

A tetrahedral-anvil press has been developed that permits x-ray diffraction powder measurements at pressures to 75 kb and temperatures to 1000°C. A counting technique, rather than photographic film, is used for x-ray detection. Sample tetrahedra of compressed LiH, boron, and boron-filled plastic are used in place of the pyrophyllite customarily used for this purpose. Two possible entrance pupil...

متن کامل

High - Pressure X - Ray Diffraction Characterization of Mt Elbert Cores

In this letter report, core sediments from the Mt Elbert Stratigraphic Test Well #1 (Mt Elbert) located at Milne Point, Alaska were characterized in situ by high-pressure x-ray diffraction (HXRD). These samples represent part of the 500 ft (152.4 m) of continuous core collected from the D and C sands in the Mikkelson Tongue of the Canning Formation (BOSWELL et al., 2008). Research teams began c...

متن کامل

High-pressure x-ray tomography microscope: Synchrotron computed microtomography at high pressure and temperature

A new apparatus has been developed for microtomography studies under high pressure. The pressure generation mechanism is based on the concept of the widely used Drickamer anvil apparatus, with two opposed anvils compressed inside a containment ring. Modifications are made with thin aluminum alloy containment rings to allow transmission of x rays. Pressures up to 8 GPa have been generated with a...

متن کامل

High pressure die casting of Fe-based metallic glass

Soft ferromagnetic Fe-based bulk metallic glass key-shaped specimens with a maximum and minimum width of 25.4 and 5 mm, respectively, were successfully produced using a high pressure die casting (HPDC) method, The influence of die material, alloy temperature and flow rate on the microstructure, thermal stability and soft ferromagnetic properties has been studied. The results suggest that a stee...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Applied Physics

سال: 2018

ISSN: 0021-8979,1089-7550

DOI: 10.1063/1.5024941