منابع مشابه
High reflectance ta-C coatings in the extreme ultraviolet.
The extreme ultraviolet (EUV) reflectance of amorphous tetrahedrally coordinated carbon films (ta-C) prepared by filtered cathodic vacuum arc was measured in the 30-188-nm range at near normal incidence. The measured reflectance of films grown with average ion energies in the ~70-140-eV range was significantly larger than the reflectance of a C film grown with average ion energy of ~20 eV and o...
متن کاملDevelopment of high-power laser coatings
Laser resistance and stress-free mirrors, windows, polarizers, and beam splitters up to 400 mm × 400 mm are required for the construction of the series SG facilities. In order to improve the coating quality, a program has been in place for the last ten years. For the small-aperture pick-off mirror, the laser-induced damage threshold (LIDT) is above 60 J/cm2 (1064 nm, 3 ns), and the reflected wa...
متن کاملAnticoking Coatings for High Temperature Petrochemical Reactors
Ñ Anticoking Coatings for High Temperature Petrochemical Reactors Ñ Coke deposition is a major problem for several refinery and petrochemical processes, among which steam cracking for ethylene production. Decreasing coking rates will reduce decoking frequency and will also decrease heat transfer degradation. For these processes, a means of reducing coking phenomena is the application of anticok...
متن کاملPlatinum-Based High Temperature Selective Absorber Coatings
In photothermal energy conversion the absorbed solar flux is converted to heat which is then used directly or is converted to mechanical or electrical energy. Efficient receiver design requires that thermal losses from the absorber surface, which is the hottest element of the system, be minimised. Receivers are, in fact, generally classified according to their operating temperature ( I , 2). Th...
متن کاملHigh Temperature Oxidation Performance of Aluminide Coatings
In order to determine the potential benefits and limitations of aluminide coatings, coatings made by chemical vapor deposition (CVD) on Feand Ni-base alloy substrates are being evaluated in various hightemperature environments. Testing of coatings on representative ferritic (Fe-9Cr-1Mo) and austenitic (type 304L stainless steel) alloys has found that high frequency thermal cycling (1h cycle tim...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Nuclear Science
سال: 1966
ISSN: 0018-9499
DOI: 10.1109/tns.1966.4324038