High-Selectivity Bandpass Filter Based on Two Merged Ring Resonators
نویسندگان
چکیده
منابع مشابه
A Compact Ultra-Wideband Bandpass Filter with Sharp-Rejection using Complementary Split Ring Resonators
A compact and sharp-rejection ultra-wideband (UWB) microstrip band-pass filter (BPF) is developed using of left handed metamaterials realized by complementary split ring resonator (CSRR). Moreover, proposed structure consists of two doublets parallel coupling gaps at each side of a microstrip ring. In comparison with some other filters, this structure shows a significantly wider passband due to...
متن کاملCompact Varactor-Tuned Bandpass Filter Using Open Split-Ring Resonators
This paper presents a compact tunable bandpass filter that is based on open split ring resonator to achieve high out-of-band rejection. Exact equations and design procedures are given based on strict theoretical analysis. By loading the varactor diodes, the center frequency and bandwidth of the bandpass filter could realize reconfigurable. Then defected ground structure was adopted in the input...
متن کاملMiniaturized High-Pass Filter Based on Balanced Composite Right-Left Handed Transmission Line Using Meander Spiral Complementary Split Ring Resonators
In this paper, a compact high-pass filter (HPF) with a sharp rejection response based on the balanced composite right-left handed (CRLH) transmission line (TL) concept is proposed. A series LC resonator using an interdigital capacitor and meander lines is designed. Also, a meander spiral complementary split ring resonator (MSCSRR) is used to realize the parallel LC resonator. The high-pass filt...
متن کاملA Compact UWB Bandpass Filter with High Selectivity and Dual Notched-Band
A novel compact-sized ultra-wideband (UWB) bandpass filter (BPF) is proposed in this paper. The proposed BPF is highly selective and is able to eliminate WLAN signals from 5.15-5.35 GHz, and downlink of X-band satellite communication signals from 7.25-7.75 GHz. Generally, a multiple-mode resonator (MMR), comprised of a U-shaped line, with two high impedance stubs connected to it, and one steppe...
متن کاملFully CMOS integrated bandpass filter based on mechanical coupling of two RF MEMS resonators
The design and test of a frequency channel selection MEMS filter implemented on a commercial CMOS technology is presented. Mechanical coupling between two clamped-clamped beams is used to obtain 0.5% frequency bandwidth in a tunable 26 MHz bandpass filter with a very low bandpass distortion (less than 0.1 dB), which makes the filter suitable for wireless super-hetherodyne transceivers in commun...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Radioengineering
سال: 2021
ISSN: ['1805-9600', '1210-2512']
DOI: https://doi.org/10.13164/re.2021.0504