High-Speed Forming of Continuous Fiber Reinforced Thermoplastics

Fiber–fiber interactions in carbon mat thermoplastics

Carbon mat thermoplastics (CMT) consisting of 12.7 mm long, chopped carbon fibers in a polypropylene matrix were manufactured using the wetlay technique at fiber volume fractions (FVF) from 10% to 25%, and tests simulating the compression molding process were conducted. The packing stress of the CMT followed a power law relation with FVF. A single fiber pull-out fixture was used to measure the ...

Designing of the Heating Process for Fiber- Reinforced Thermoplastics with Middle-Wave Infrared Radiators

Manufacturing components of fiber-reinforced thermoplastics requires three steps: heating the matrix, forming and consolidation of the composite and terminal cooling the matrix. For the heating process a pre-determined temperature distribution through the layers and the thickness of the pre-consolidated sheets is recommended to enable forming mechanism. Thus, a design for the heating process fo...

Continuous Phase Modulation for High Speed Fiber-optic Links

presenting a new method for high speed incremental forming

recently, incremental sheet metal forming (ismf) process as one of the new methods in rapid prototyping collection has been considered by researchers. this process is based on a defined path in cnc controller and applies a spherical-head tool that supplies the required pressure for sheet metal forming. despite affirmation of process ability in forming symmetric geometries, some of its aspects s...

Experimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature

This study investigated the effects of high temperature exposure on the compressive, tensile, and flexural strengths of concrete containing glass fiber. A total of 108 cubic specimens (150 mm × 150 mm × 150 mm), cylindrical specimens (300 mm × 150 mm), and prismatic specimens (500 mm × 150 mm × 150 mm) were prepared for compressive, tensile, and flexural strength testing, respectively. The spec...