High temperature degradation by erosion-corrosion in bubbling fluidized bed combustors
نویسندگان
چکیده
منابع مشابه
High Temperature Erosion- Oxidation Behavior of Nickel- Based Alloys Containing Mo in Fluidized Bed Waste Incineration
High-temperature erosion-oxidation behavior of nickel-based alloys containing 0-7 wt.% Mo in fluidized bed waste incineration conditions was studied. A stream of hot condensed air with a flow rate of 25 L/min caused hot silica sand (700 °C) mixed with 0.5 wt.% of chloride salts to hit the specimens for 250 h. By removing the erosive factor, the high-temperature oxidation behavior of the alloys ...
متن کاملThe Mechanism of Char Ignition in Fluidized Bed Combustors
Knowledge about ignition processes of coal in fluidized beds is of importance for the start-up and dynamic control of these combustors. Initial experiments in a transparent fluidized bed scale model showed the existence of a considerable induction period for the ignition of char, especially at low bed temperatures (e.g., 800-950K for bituminous coal). This paper focuses on char-ignition delay a...
متن کاملBubbling fluidized bed characterization using Electrical Capacitance Volume Tomography (ECVT)
Available online xxxx
متن کاملDegradation of organic compounds by fluidized bed fenton process
Landfill leachate is highly loaded, toxic and is bad for the sanitation of wastewater. In this paper, the treatment of the municipal landfill leachate from Shaoxing landfill was evaluated by using gas-liquid fluidized bed with Fenton reagent. The effects of various operating conditions such as treatment time, initial pH value, initial [H2O2], initial [Fe], and ventilation volume were examined. ...
متن کاملBubbling behavior of a fluidized bed of fine particles caused by vibration-induced air inflow
We demonstrate that a vibration-induced air inflow can cause vigorous bubbling in a bed of fine particles and report the mechanism by which this phenomenon occurs. When convective flow occurs in a powder bed as a result of vibrations, the upper powder layer with a high void ratio moves downward and is compressed. This process forces the air in the powder layer out, which leads to the formation ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2004
ISSN: 1516-1439
DOI: 10.1590/s1516-14392004000100011