High-Temperature Fatigue Crack Propagation Property of Mod. 9Cr-1Mo Steel in Vacuum and in Air.

High Temperature Fatigue Crack Propagation in INCONEL718

High temperature fatigue crack propagation behaviour of Inconel 718

The overall objective of this work has been to develop and evaluate tools for designing against fatigue in gas turbine applications, with special focus on the nickelbased superalloy Inconel 718. The fatigue crack propagation behaviour under high temperature hold times has been studied. Firstly, the main fatigue crack propagation phenomena have been investigated with the aim of setting up a basi...

Analyzing the characteristics of the cavity nucleation, growth and coalescence mechanism of 9Cr-1Mo-VNb steel (P91) steel

Creep damage is one of the serious problems for the high temperature industries and computational approach (such as continuum damage mechanics) has been developed and used, complementary to the experimental approach, to assist safe operation. However, there are no ready creep damage constitutive equations to be used for predicting the lifetime for this type of alloy, particularly for low stress...

Effects of Microstructure on Room Temperature Fatigue Crack Initiation and Short Crack Propagation in Udimet

An assessment of the effects of microstructure on room temperature fatigue crack initiation and short crack propagation in a Ni-base superalloy is presented. The assessment was carried out on microstructural variants of U720Li, including as-received U720Li, U720Li-LG (large grain variant) and U720Li-LP (large intragranular coherent γ′ variant). Fatigue tests were carried out at room temperature...

Fatigue crack propagation in microcapsule - toughened epoxy

The addition of liquid-filled urea-formaldehyde (UF) microcapsules to an epoxy matrix leads to significant reduction in fatigue crack growth rate and corresponding increase in fatigue life. Mode-I fatigue crack propagation is measured using a tapered doublecantilever beam (TDCB) specimen for a range of microcapsule concentrations and sizes: 0, 5, 10, and 20% by weight and 50, 180, and 460 lm di...