High Temperature Modification of TiCr2
نویسندگان
چکیده
منابع مشابه
Factors affecting the room-temperature mechanical properties of TiCr2-base Laves phase alloys
Various effects on the room-temperature mechanical properties of TiCr2-base alloys have been assessed in efforts to improve the toughness of Laves phase intermetallics (AB2). Systematic studies were performed on: (i) single-phase stoichiometric and nonstoichiometric TiCr2, (ii) TiCr2-base ternary Laves phases, and (iii) two-phase binary alloys containing TiCr2. In order to make quantitative com...
متن کاملHIGH TEMPERATURE ELASTIC PROPERTIES OF REFRACTORY MATERIALS
Abstract: A pulse-echo technique, based on ultrasonic "long-bar" mode (LBM) velocity measurements, working up to 1700°C is described. Magnetostrictive transducers and ultrasonic lines used in a 40-85 kHz frequency range are detailed. The conditions of choice of fundamental parameters (frequency, line geometry, sample size) are discussed in relation with the nature and the microstructure of ...
متن کاملHigh Temperature Behavior of Dual Phase Steels
Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...
متن کاملEffect of firing temperature on the properties of inorganic high temperature phosphate adhesive
High-temperature adhesives are considered for high-temperature applications such as the refractory industry. In this research, inorganic high-temperature phosphate-based adhesive was prepared using alumina and micro silica as the main raw materials and monoaluminum phosphate as a binder. The effect of firing temperature on the properties of the adhesive including phases, microstructure, compres...
متن کاملOn the Modification of Temperature Characteristics. I
The temperature characteristics for frequency of pulsation in isolated cloacal ends of Holothuria tubulosa are micro = 20,400 from 10 to 20 degrees , 8,000 from 20 to 30 degrees . The critical temperatures 10 degrees , 20 degrees , 30 degrees are related to thermal conditions in the environment. In sea water with doubled NaCl content micro = 8,000 from 10 to 30 degrees . This is consistent with...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOM
سال: 1953
ISSN: 1047-4838,1543-1851
DOI: 10.1007/bf03397475