High Temperature Oxidation of an Fe-10Cr-0.5Al Alloy
نویسندگان
چکیده
منابع مشابه
High Temperature Oxidation Behaviour of Nimonic - 115 Alloy in Presence of Sodium Salts at 850OC
The high temperature oxidation behaviour of Nimonic-115 industrial alloy has been investigated in presence of NaNO3, Na2CO3 and Na2O2 at 850oC in flowing air. The oxidation kinetics and effect of salt deposition for the period of 48 h were studied. The scale morphologies were determined on the basis of X-ray diffraction anal...
متن کاملHigh-temperature giant magnetoimpedance in Fe-based nanocrystalline alloy
Giant magnetoimpedance ~GMI! was investigated from room temperature up to 823 K in an Fe-based nanocrystalline Fe73.0Cu1.0Nb2.5V1.0Si13.5B9.0 ribbon. With an increment of the measuring temperature ~T!, GMI shows notable enhancement followed by a declining dependence, yielding a maximum value around 603 K where the relative GMI is nearly four times that at room temperature. The field at the peak...
متن کاملhigh temperature oxidation behaviour of nimonic - 115 alloy in presence of sodium salts at 850oc
the high temperature oxidation behaviour of nimonic-115 industrial alloy has been investigated in presence of nano3, na2co3 and na2o2 at 850oc in flowing air. the oxidation kinetics and effect of salt deposition for the period of 48 h were studied. the scale morphologies were determined on the basis of x-ray diffraction analysis and scanning electron microscopic techniques. it has been shown t...
متن کاملMODELING HIGH TEMPERATURE FLOW BEHAVIOR OF AN AL 6061 ALUMINIUM ALLOY
Hot deformation behavior of a medium Cr/Mn Al6061 aluminum alloy was studied by isothermal compression test at temperatures range of 320 to 480 °C and strain rates range of 0.001 to 0.1 s −1. The true stresstrue strain curves were analyzed to characterize the flow stress of Al6061. Plastic behavior, as a function of both temperature and strain rate for Al6061, was also modeled using a hyperboli...
متن کاملHigh-Temperature Oxidation of Fe3Al Intermetallic Alloy Prepared by Additive Manufacturing LENS
The isothermal oxidation of Fe-28Al-5Cr (at%) intermetallic alloy microalloyed with Zr and B (<0.08 at%) in air atmosphere, in the temperature range of 1000 to 1200 °C, was studied. The investigation was carried out on the thin-walled (<1 mm) elements prepared by Laser Engineered Net Shaping (LENS) from alloy powder of a given composition. Characterization of the specimens, after the oxidation,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1982
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.46.5_546