High-temperature sorbents for oxygen

Lime-Based Sorbents for High-Temperature CO2 Capture—A Review of Sorbent Modification Methods

This paper presents a review of the research on CO(2) capture by lime-based looping cycles undertaken at CanmetENERGY's (Ottawa, Canada) research laboratories. This is a new and very promising technology that may help in mitigation of global warming and climate change caused primarily by the use of fossil fuels. The intensity of the anticipated changes urgently requires solutions such as more c...

Bimodular high temperature planar oxygen gas sensor

A bimodular planar O2 sensor was fabricated using NiO nanoparticles (NPs) thin film coated yttria-stabilized zirconia (YSZ) substrate. The thin film was prepared by radio frequency (r.f.) magnetron sputtering of NiO on YSZ substrate, followed by high temperature sintering. The surface morphology of NiO NPs film was characterized by atomic force microscope (AFM) and scanning electron microscope ...

CFD Modeling Study of High Temperature and Low Oxygen Content Exhaust Gases Combustion Furnaces

This paper reports a CFD modeling study on the possibility of using high temperature and low oxygen content exhaust gases as oxidant for combustion in an industrial furnace by a written computer program. Under these conditions,the predicted results for the flow and heat transfer properties are compared with those under the several cases of conventional and highly preheated...

High-temperature removal of cadmium from a gasification flue gas using solid sorbents

CO2 Capture at High Temperature and Low Concentration on Li4SiO4 Based Sorbents

Solid sorbents based on lithium orthosilicate (Li4SiO4) have shown promise for CO2 capture at high temperature. Improved sorption properties can be obtained by appropriate doping. In this study, different promoted Li4SiO4-based sorbents were prepared by addition of potassium carbonate and binary/ternary alkali (Li, K and Na) carbonate eutectic mixtures. The CO2 sorption properties of the sorben...