High velocity suspension flame spraying (HVSFS) of metal doped bioceramic coatings

Processing and Characterisation of High-velocity Suspension Flame Sprayed (hvsfs) Bioactive Glass Coatings

The High-Velocity Suspension Flame Spraying (HVSFS) technique was employed in order to deposit bioactive glass coatings onto titanium substrates. Two different glass compositions were examined: the classical 45S5 Bioglass and a newly-developed SiO2–CaO–K2O–P2O5 glass, labelled as “Bio-K”. Suitable raw materials were melted in a furnace and fritted by casting into water. The frit was dry-milled ...

Solution and Suspension Plasma Spraying of Nanostructure Coatings

Manufacturing nanostructured YSZ coatings by suspension plasma spraying (SPS): effect of injection parameters

The suspension plasma spraying process is investigated by using shadow imaging techniques to appreciate the different trajectories of the liquid jet interacting with a DC highenergy plasma flow. Then, the modelling of different liquid injections (isolated droplet, train of droplets and continuous jet) helps to determine which injection type must be preferred. From that, coating depositions have...

Application of High-Velocity Oxygen-Fuel (HVOF) Spraying to the Fabrication of Yb-Silicate Environmental Barrier Coatings

From the literature, it is known that due to their glass formation tendency, it is not possible to deposit fully-crystalline silicate coatings when the conventional atmospheric plasma spraying (APS) process is employed. In APS, rapid quenching of the sprayed material on the substrate facilitates the amorphous deposit formation, which shrinks when exposed to heat and forms pores and/or cracks. T...

Ion-Doped Silicate Bioceramic Coating of Ti-Based Implant

Titanium and its alloy are known as important load-bearing biomaterials. The major drawbacks of these metals are fibrous formation and low corrosion rate after implantation. The surface modification of biomedical implants through various methods such as plasma spray improves their osseointegration and clinical lifetime. Different materials have been already used as coatings on biomedical implan...