Holding Force of Nickel Layer for Single Grit on Electrodeposited Diamond Wheel.
نویسندگان
چکیده
منابع مشابه
Deformation of electrodeposited nanocrystalline nickel
The mechanisms of deformation and damage evolution in electrodeposited, fully dense, nanocrystalline Ni with an average grain size of ~30 nm and a narrow grain size distribution were investigated by recourse to (i) tensile tests performed in situ in the transmission electron microscope and (ii) microscopic observations made at high resolution following ex situ deformation induced by compression...
متن کاملSingle-Crystal Diamond Nanowire Tips for Ultrasensitive Force Microscopy.
We report the fabrication, integration, and assessment of sharp diamond tips for ultrasensitive force microscopy experiments. Two types of tips, corresponding to the upper and lower halves of a diamond nanowire, were fabricated by top-down plasma etching from a single-crystalline substrate. The lower, surface-attached halves can be directly integrated into lithographically defined nanostructure...
متن کاملA Single Grit Approach
The University Repository is a digital collection of the research output of the University, available on Open Access. Copyright and Moral Rights for the items on this site are retained by the individual author and/or other copyright owners. Users may access full items free of charge; copies of full text items generally can be reproduced, displayed or performed and given to third parties in any ...
متن کاملHydrogen Diffusion and Trapping in Electrodeposited Nickel
In an attempt to quantify grain boundary diffusion of hydrogen in nickel, permeation in electrodeposited foil has been investigated. Pinhole-free specimens were plated from a nickel sulfamate bath onto a reusable anodized titanium cathode. The microstructure was a mixture of regions of fine grains (diameters <0.1 tm) and individual grains up to 2 tm in diameter. The specimens were subjected to ...
متن کاملAnalytical Threshold Voltage Computations for 22 nm Silicon-on-Diamond MOSFET Incorporating a Second Oxide Layer
In this paper, for the first time, an analytical equation for threshold voltage computations in silicon-on-diamond MOSFET with an additional insulation layer is presented; In this structure, the first insulating layer is diamond which covered the silicon substrate and second insulating layer is SiO2 which is on the diamond and it is limited to the source and drain on both sides. Analytical solu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1995
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.46.371