Hot corrosion behavior of commercial alloys in thermal energy storage material of molten MgCl2/KCl/NaCl under inert atmosphere

Hot Corrosion Behavior of Functional Graded Material Thermal Barrier Coating (RESEARCH NOTE)

In this paper a functional graded material (FGM) thermal barrier coating (TBC) is prepared using Atmospheric Plasma Spraying (APS) method. The FGM layers were deposited by varying the feeding ratio of CYSZ/NiCrAlY and conventional CYSZ on a NiCrALY-coated Inconel 738 substrates. Hot corrosion behavior, bonding strength and the related failure mechanisms of a conventional TBC and a FGM TBC are i...

Design of new molten salt thermal energy storage material for solar thermal power plant

In order to obtain molten salt with lower melting point, higher thermal stability and reduced cost relative to previously available materials, a variety of molten salt mixtures of alkali nitrates are investigated by experimental methods. However, since measurements are generally expensive and time-consuming, it is of interest to be able to predict melting point and the component of multi-compon...

Molten Salt Thermal Energy Storage in Thermoclines under Different Environmental Boundary Conditions

Thermal Analysis of Thermal Energy Storage Systemwith Phase Change Material

Due to fast depletion of conventional energy sources and ever increasing demand of energy, many researchers started paying attention to renewable energy sources.Thermal Energy Storage (TES) is one of the key technologies for energy conservation and has recently been developed to a point where it can have a significant impact on modern technologies. The present work deals with the study of a sph...

Microencapsulation of Butyl Stearate as Phase Change Material by Melamine Formaldehyde Shell for Thermal Energy Storage

Butyl stearate as a phase change material was microencapsulated within melamine-formaldehyde resin using emulsion polymerization. Morphology and thermal specification of produced microcapsules were studied by Fourier transform infrared spectroscopy, FT-IR, scanning electron microscopy, SEM, and Differential scanning calorimetry analysis, DSC. FT-IR spectra validated the existence of the butyl s...