Hot spinning formability of aluminum alloy tube
نویسندگان
چکیده
منابع مشابه
Evaluating the Applicability of GTN Damage Model in Forward Tube Spinning of Aluminum Alloy
Tube spinning is an effective plastic-forming technology for forming light-weight, high-precision and high-reliability components in high-tech fields, such as aviation and aerospace. However, cracks commonly occur in tube spinning due to the complexity of stress state, which severely restricts the improvement of the forming quality and forming limit of components. In this study, a finite elemen...
متن کاملPlastometric Study of Hot Formability
P. Kawulok, I. Schindler, R. Kawulok, S. Rusz, P. Opěla, J. Kliber, M. Kawuloková VSB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic Z. Solowski, K.M. Čmiel Třinecké železárny a.s., Czech republic Formability of hypereutectoid C-Mn-Cr-V steel in hot condition was investigated with use of plastometric methods. A wide range of deformation temper...
متن کاملMicrostructural evolution during recrystallization in hot rolled Aluminum Alloy 1050
The evolution of texture as a function of recrystallization has been characterized for hot-rolled AA1050. Samples prepared from a hot rolled sheet were annealed isothermally for sufficient time to allow complete recrystallization. The spatial orientation variation within the deformed microstructure of nucleation, growth and orientations of recrystallized grains is examined. The microstructural ...
متن کاملHot Formability of Particle reinforced Ti - Alloys
Titanium alloys exhibit mechanical and physical properties that fit structural applications demanding light-weight, corrosion resistance and biocompatibility. Ceramic reinforcements can further improve some of these mechanical properties, such as wear resistance, specific stiffness and specific strength. In comparison to continuous reinforced titanium alloys, the particle reinforced alloys (PRT...
متن کاملThe influence of ultrasonic-vibration on hot upsetting of aluminum alloy.
The traditional ultrasonic apparatus cannot be operated at high temperature, explaining why the effect of ultrasonic-vibration on high temperature metal forming has seldom been addressed in literature. This study establishes an ultrasonic-vibration hot upsetting system. A cooling mechanism is used to solve the problem of high temperature. The effects of temperature and strain rate during ultras...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2018
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2018.07.360