Human spinal reflex like strain-controlled power devices based on piezotronic effect
نویسندگان
چکیده
منابع مشابه
GaN nanobelt-based strain-gated piezotronic logic devices and computation.
Using the piezoelectric polarization charges created at the metal-GaN nanobelt (NB) interface under strain to modulate transport of local charge carriers across the Schottky barrier, the piezotronic effect is utilized to convert mechanical stimuli applied on the wurtzite-structured GaN NB into electronic controlling signals, based on which the GaN NB strain-gated transistors (SGTs) have been fa...
متن کاملFlexible piezotronic strain sensor.
Strain sensors based on individual ZnO piezoelectric fine-wires (PFWs; nanowires, microwires) have been fabricated by a simple, reliable, and cost-effective technique. The electromechanical sensor device consists of a single electrically connected PFW that is placed on the outer surface of a flexible polystyrene (PS) substrate and bonded at its two ends. The entire device is fully packaged by a...
متن کاملStrain-gated piezotronic transistors based on vertical zinc oxide nanowires.
Strain-gated piezotronic transistors have been fabricated using vertically aligned ZnO nanowires (NWs), which were grown on GaN/sapphire substrates using a vapor-liquid-solid process. The gate electrode of the transistor is replaced by the internal crystal potential generated by strain, and the control over the transported current is at the interface between the nanowire and the top or bottom e...
متن کاملapplication of upfc based on svpwm for power quality improvement
در سالهای اخیر،اختلالات کیفیت توان مهمترین موضوع می باشد که محققان زیادی را برای پیدا کردن راه حلی برای حل آن علاقه مند ساخته است.امروزه کیفیت توان در سیستم قدرت برای مراکز صنعتی،تجاری وکاربردهای بیمارستانی مسئله مهمی می باشد.مشکل ولتاژمثل شرایط افت ولتاژواضافه جریان ناشی از اتصال کوتاه مدار یا وقوع خطا در سیستم بیشتر مورد توجه می باشد. برای مطالعه افت ولتاژ واضافه جریان،محققان زیادی کار کرده ...
15 صفحه اولStrain-gated piezotronic logic nanodevices.
Fabrication of the strain-gated inverter (SGI) The SGI was fabricated by bonding two ZnO NWs laterally on a Dura-Lar film. The thickness of the Dura-Lar film is 0.5 mm. The ZnO NWs were synthesized via a physical vapor deposition method reported elsewhere [32] and typically have diameters of 300 nm and lengths of 400 μm (Fig. 1a). The films were first cleaned with acetone, isopropyl alcohol and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science Bulletin
سال: 2020
ISSN: 2095-9273
DOI: 10.1016/j.scib.2020.04.027