Hybrid-hybrid machining of SiC-reinforced aluminium metal matrix composite
نویسندگان
چکیده
A hybrid-hybrid (ultrasonic-assisted + laser-assisted) turning study of silicon carbide reinforced aluminium metal matrix composite is presented. The results show a significant reduction average cutting force with an improved surface finish machined components compared to conventional machining, implying that this new and novel paradigm viable machining process.
منابع مشابه
Ultrasonic assisted turning of an aluminium-based metal matrix composite reinforced with SiC particles
In this study, diamond turning of an aluminiumbased metal matrix composite (MMC) reinforced with SiC particles was conducted with the assistance of ultrasonic vibrations. A simple and small size vibration device was designed to mount a piezoelectric transducer and a diamond insert onto a CNC machine. Turning experiments were carried out using a factorial design to investigate the effects of vib...
متن کاملMachining Response in Turning Aluminium Composite LM13 With 15% SiC
In this paper, an attempt has been made to experimental investigation the machinability of aluminum metal matrix composite (LM13/SiC/15p) during continuous turning of composite rods using carbide inserts. Base matrix material is Aluminium LM13 reinforced with 15 % weight by volume of Silicon carbide particles of mean diameter 20 μm to 40 μm is used. The main focus of investigation is to determi...
متن کاملA Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites
One of the most important applications of carbon nanotubes (CNTs) is as reinforcement of metal matrix composites, because of their excellent mechanical properties. In this study, Al-TiO2-multi walled carbon nanotubes (MWCNTs) nanocomposite is fabricated using isostatic pressing followed by hot extrusion. Mechanical alloying is used to mix powders of aluminium, TiO2 and MWCNTs. TiO2 with the amo...
متن کاملCasting of SiC Reinforced Metal Matrix Composites
Composites based on two aluminium alloys (A536 and 6061) reinforced with 10% or 20% volume fraction of SiC particles were produced by gravity casting and a novel two-step mixing method was applied successfully to improve the wettability and distribution of the particles. The SiC particles were observed to be located predominantly in the interdendrit ic regions, and a thermal lag model is propos...
متن کاملStudy on damping capacity and dynamic Young’s modulus of aluminium matrix composite reinforced with SiC particles
The development of high damping materials for noise reduction and attenuation of vibration on structural applications, such as automotive and aerospace industries, has been investigated. This experimental study is concerned with the damping capacity (tan delta) and dynamic Young’s modulus (|E*|) of Silicon carbide (SiC) reinforced aluminium (Al) matrix composite. AlSi-SiCp composite was produce...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Manufacturing letters
سال: 2022
ISSN: ['2213-8463']
DOI: https://doi.org/10.1016/j.mfglet.2022.04.002