Hybrid Nanocomposites for 3D Optics: Using Interpolymer Complexes with Cellulose Nanocrystals
نویسندگان
چکیده
منابع مشابه
Starch-based nanocomposites reinforced with flax cellulose nanocrystals
In this study, the cellulose crystals, prepared by acid hydrolysis of flax fiber, consisted of slender rods with lengths ranging from 100 to 500 nm and diameters ranging from 10 to 30 nm, respectively. After mixing the suspension of flax cellulose nanocrystals (FCNs) and plasticized starch (PS), the nanocomposite films were obtained by the casting method. The effects of FCNs loading on the morp...
متن کاملbarrier properties of cellulose nanocrystals -pva nanocomposites
the aim of this study was to investigate the barrier properties of cellulose nanocrystals-pvananocomposites. nanocomposite films with different filler loading levels (3, 6, 9 and 12% by wt) weredeveloped by solvent casting method. the effect of cellulose nanocrystals on the barrier properties ofthe nanocomposites was studied. to this end, moisture absorption, water vapor permeability (wvp),oxyg...
متن کاملSynthesis of TiO2-ZnO-ZrO2 Nanocomposites for Nonlinear Optics Applications
A sol-gel technique under ultrasonic irradiation was applied to synthesize ZrO2/TiO2/ZnOnanocomposites. X-ray diffraction analysis confirmed the successful synthesis of nanocomposites. The strain and crystalline size values of ZrO2/TiO2/ZnO nanocomposites are estimated to be 9.98×10-4 and 17.66 nm, respectively. The linear absorption coefficient of ZrO2/TiO2/ZnO nanocomposites was measure...
متن کاملRecent Development in Applications of Cellulose Nanocrystals for Advanced Polymer-Based Nanocomposites by Novel Fabrication Strategies
© 2012 Zhou and Wu, licensee InTech. This is an open access chapter distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Recent Development in Applications of Cellulose Nanocrystals for Advanced Polymer-Based...
متن کاملMagneto-responsive hybrid materials based on cellulose nanocrystals
We fabricated self-standing films of cellulose nanocrystals (CNC) and electrospun composite fibers with CNC and polyvinyl alcohol both with magnetic properties arising from cobalt iron oxide nanoparticles in the CNC matrix. Aqueous dispersions of cobalt-iron oxide nanoparticles (10–80 nm diameter) and CNCs (ca. 150 nm length) were used as precursor systems for the films and composite fibers. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ACS Applied Materials & Interfaces
سال: 2019
ISSN: 1944-8244,1944-8252
DOI: 10.1021/acsami.9b01699