Hybrid solar cells from Sb2S3 nanoparticle ink
نویسندگان
چکیده
منابع مشابه
Optimizing ZnO nanoparticle surface for bulk heterojunction hybrid solar cells
The performance of hybrid solar cells composed of polymer and ZnO is mainly hindered by the defects of ZnO. Here, we investigate the effects of ZnO nanoparticle surface modification with poly(ethylene oxide) (PEO) on the performance of bulk heterojunction hybrid solar cells based on poly[2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) and ZnO nanoparticles. The reference devic...
متن کاملToward High‐Efficiency Solution‐Processed Planar Heterojunction Sb2S3 Solar Cells
Low-cost hybrid solar cells have made tremendous steps forward during the past decade owing to the implementation of extremely thin inorganic coatings as absorber layers, typically in combination with organic hole transporters. Using only extremely thin films of these absorbers reduces the requirement of single crystalline high-quality materials and paves the way for low-cost solution processin...
متن کاملSb2S3 grown by ultrasonic spray pyrolysis and its application in a hybrid solar cell
Chemical spray pyrolysis (CSP) is a fast wet-chemical deposition method in which an aerosol is guided by carrier gas onto a hot substrate where the decomposition of the precursor chemicals occurs. The aerosol is produced using an ultrasonic oscillator in a bath of precursor solution and guided by compressed air. The use of the ultrasonic CSP resulted in the growth of homogeneous and well-adhere...
متن کاملHybrid solar cells
Historically, conventional solar cells were built from inorganic materials such as silicon. Although the efficiency of such conventional solar cells is high, very expensive materials and energy intensive processing techniques are required. Hybrid and photoelectrochemical (dye sensitized) solar cells have been the cheap alternatives for conventional silicon solar cells. A hybrid solar cell consi...
متن کاملCuInS(2) solar cells by air-stable ink rolling.
Solution-based deposition techniques are widely considered to be a route to low-cost, high-throughput photovoltaic device fabrication. In this report, we establish a methodology for a highly scalable deposition process and report the synthesis of an air-stable, vulcanized ink from commercially available precursors. Using our air-stable ink rolling (AIR) process, we can make solar cells with an ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Solar Energy Materials and Solar Cells
سال: 2017
ISSN: 0927-0248
DOI: 10.1016/j.solmat.2017.07.046