Hydration Products, Morphology and Microstructure of Activated Slag Cement
نویسندگان
چکیده
منابع مشابه
Effect of Graphene Oxide (GO) on the Morphology and Microstructure of Cement Hydration Products
In this study, the effects of graphene oxide (GO) on the microstructure of cement mortars were studied using scanning electron microscopy (SEM), thermogravimetric (TG), and X-ray diffraction (XRD) techniques. Cement mortar samples with different proportions of GO (0.02, 0.04, 0.06, and 0.08 wt % based on the weight of cement) were prepared. The test results showed that GO affected the crystalli...
متن کاملMechanical and leaching behaviour of slag-cement and lime-activated slag stabilised/solidified contaminated soil.
Stabilisation/solidification (S/S) is an effective technique for reducing the leachability of contaminants in soils. Very few studies have investigated the use of ground granulated blast furnace slag (GGBS) for S/S treatment of contaminated soils, although it has been shown to be effective in ground improvement. This study sought to investigate the potential of GGBS activated by cement and lime...
متن کاملCement hydration: building bridges and dams at the microstructure level
The concurrent goals of cement hydration are to percolate (bridge) the original cement particles into a load-bearing network and to depercolate (dam) the original water-filled capillary porosity. The initial volume, particle size distribution, and flocculation/dispersion state of the cement particles have a large influence on both hydration rates and microstructure development. Likewise, the ca...
متن کامل(Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement
Concurrently to research conducted on ordinary Portland cement (PC), new types of binders were developed during the last decades. These are formed by alkali-activation of metakaolin or ground-granulated blast furnace slag (GGBFS) and are named, respectively, geopolymers (GP) or alkali-activated slag (AAS). Four different cementitious materials were synthesised: PC, AAS, GP, and a mix GP-AAS and...
متن کاملSEM investigation of microstructures in hydration products of portland cement
Portland cement is the one of the main ingredients in the manufacture of many building materials include concrete composites. The phase composition of hydration products is controlled by means of XRD and DTA/TG analysis. Observations of phase changes and microstructure of maturing cement pastes can also be observed using scanning electron microscopy (SEM) techniques combined with chemical analy...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Concrete Structures and Materials
سال: 2014
ISSN: 1976-0485,2234-1315
DOI: 10.1007/s40069-013-0056-x