Hydraulic and Thermal Performance of Microchannel Heat Sink Inserted with Pin Fins
نویسندگان
چکیده
منابع مشابه
Thermal Performance of an Elliptical Pin Fin Heat Sink
Christopher L. Chapman, and Seri Lee Aavid Engineering, Inc. Laconia, New Hampshire 03247 Bill L. Schmidt Silicon Graphics Computer Systems Mountainview, California 94039 Comparative thermal tests have been carried out using aluminum heat sinks made with extruded fin, cross-cut rectangular pins, and elliptical shaped pins in low air flow environments. The elliptical pin heat sink was designed t...
متن کاملThermal and hydraulic characteristics of nanofluid in a triangular grooved microchannel heat sink (TGMCHS)
A numerical simulation is conducted to examine the heat transfer and fluid flow characteristics of nanofluids in a triangular grooved microchannel heat sink (TGMCHS). The governing and energy equations are solved using the finite volume method (FVM). The influence of the geometrical parameters such as the angle (50–100°), depth (10–25 lm) and pitch (400–550 lm) of the groove on the thermal perf...
متن کاملFlow Boiling Heat Transfer on Micro Pin Fins Entrenched in a Microchannel
Flow boiling of 1-methoxyheptafluoropropane (HFE 7000) in 222 m hydraulic diameter channels containing a single row of 24 inline 100 m pin fins was studied for mass fluxes from 350 kg /m2 s to 827 kg /m2 s and wall heat fluxes from 10 W /cm2 to 110 W /cm2. Flow visualization revealed the existence of isolated bubbles, bubbles interacting, multiple flow, and annular flow. The observed flow patte...
متن کاملAnalysis of flexible microchannel heat sink systems
In this work, single layered (SL) and double layered (DL) flexible microchannel heat sinks are analyzed. The deformation of the supporting seals is related to the average internal pressure by theory of elasticity. It is found that sufficient cooling can be achieved using SL flexible microchannel heat sinks at lower pressure drop values for softer seals. Double layered flexible microchannel heat...
متن کاملNumerical Optimization of Pin-Fin Heat Sink with Forced Cooling
This study presents the numerical simulation of optimum pin-fin heat sink with air impinging cooling by using Taguchi method. 9 L ( 4 3 ) orthogonal array is selected as a plan for the four design-parameters with three levels. The governing equations are discretized by using the control-volume-based-finite-difference method with a power-law scheme on the non-uniform staggered grid. We solved th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Micromachines
سال: 2021
ISSN: 2072-666X
DOI: 10.3390/mi12030245