Hydrogen adsorption capacity using modified nickel-kenaf core at different concentrations

Iyiolecular Orbital Models for Hydrogen Adsorption on Different Sites of a Nickel Crystal

Citric acid modified kenaf core fibres for removal of methylene blue from aqueous solution.

Chemically modified kenaf core fibres were prepared via esterification in the presence of citric acid (CA). The adsorption kinetics and isotherm studies were carried out under different conditions to examine the adsorption efficiency of CA-treated kenaf core fibres towards methylene blue (MB). The adsorption capacity of the kenaf core fibres increased significantly after the citric acid treatme...

Adsorption of Hydrogen on a Nickel (100) Surface

The adsorption of hydrogen on a clean Ni(100) single crystal surface was studied in UHV between 120 K and 500 K means of LEED, thermal desorption spectroscopy and work function measurements. H2 chemisorption occurs in two atomic states ßi and ßz with maximum desorption rates (at saturation) at 318 K and 348 K. The activation energy for desorption was determined to be 20 ( ± 2) kcal/mole for the...

Nickel adsorption on the modified pine tree materials.

Removal of nickel ions from aqueous solutions containing 1-100 mg l(-1), using pine tree (Pinus nigra) materials modified with HCl, was investigated on a laboratory scale. For this purpose, two natural adsorbents such as the modified pine bark (MPB) and the modified pine cone (MPC) materials with HCl solution were studied. At first, the required concentration level of the HCl solution for the m...

Adsorption of Hydrogen Sulfide at low temperature

From an ecological perspective is biogas an important source of energy. It is produced from fermentation of organic material, e.g. household waste and wastewater sludge. The composition of the gas depends on the raw material and varies between 65-85% methane, 15-35% carbon dioxide and small amounts of ammonia and hydrogen sulfide. To use the biogas it is important to purify it from hydrogen sul...