Hydrogen storage capacity of highly porous carbons synthesized from biomass-derived aerogels
نویسندگان
چکیده
منابع مشابه
Preparation and hydrogen storage capacity of highly porous activated carbon materials derived from polythiophene
Highly porous carbons have been successfully synthesized by chemical activation of polythiophene with KOH. The activation process was performed under relatively mild activation conditions, i. e., a KOH/polymer weight ratio of 2 and reaction temperatures in the 600 – 850 oC range. The porous carbons thus obtained possess very large surface areas, up to 3000 m/g, and pore volumes of up to 1.75 cm...
متن کاملHighly porous S-doped carbons
Porous sulphur-doped carbons have been prepared by using polythiophene (PTh) as carbon precursor and KOH as activating agent. The activation process was carried out under several operating conditions, i. e. a KOH/PTh weight ratio of 2 or 4, and reaction temperatures in the 600-850 oC range. The porous carbons thus obtained exhibit very large apparent surface areas and high pore volumes of up to...
متن کاملThe Storage of Hydrogen in Nanoporous Carbons
An efficient storage of hydrogen is a crucial requirement for its use as a fuel in the cars of the future. Experimental and theoretical work has revealed that porous carbons are promising materials for storing molecular hydrogen, adsorbed on the surfaces of the pores. The microstructure of porous carbons is not well known, and we have investigated a class of porous carbons, the carbide-derived ...
متن کاملHighly Porous Activated Carbons Derived from Poly(styrene Sulfonic Acid) Based Organic Salts
The objective of this paper is to study the effect of transition metals used in organic salts on the structural properties of carbonaceous materials. To accomplish our objectives, we carbonized commercially available poly(styrene sulfonic acid-co-maleic acid), sodium salt. To study the effect of metals, sodium was exchanged with either cobalt, nickel, or iron. Park and Jung [1], and Putyera et ...
متن کاملCharacterisation of porous hydrogen storage materials: carbons, zeolites, MOFs and PIMs.
Porous materials adsorb H2 through physisorption, a process which typically has a rather low enthalpy of adsorption (e.g. ca. 4 to 7 kJ mol(-1) for MOFs), thus requiring cryogenic temperatures for hydrogen storage. In this paper, we consider some of the issues associated with the accurate characterisation of the hydrogen adsorption properties of microporous materials. We present comparative gra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Carbon letters
سال: 2015
ISSN: 1976-4251
DOI: 10.5714/cl.2015.16.2.127