Identification of carbon deposition and its removal in solid oxide fuel cells by applying a non-conventional diagnostic tool
نویسندگان
چکیده
Non-conventional online monitoring tools enable identification of the degradation in solid oxide fuel cells at its preliminary stage.
منابع مشابه
Investigation the performance of solid oxide fuel cells and the role of nanotechnology in its construction
Nanotechnology is well used in the development and performance improvement of solid oxide fuel cells (SOFCs). The high operating temperature of SOFCs (700-900 ° C) has led to serious shortcomings in their overall performance and durability. Hence, the high operating temperature has been reduced to the average temperature range of approximately 44-700 Celsius, which has improved performance and ...
متن کاملPromotion of water-mediated carbon removal by nanostructured barium oxide/nickel interfaces in solid oxide fuel cells
The existing Ni-yttria-stabilized zirconia anodes in solid oxide fuel cells (SOFCs) perform poorly in carbon-containing fuels because of coking and deactivation at desired operating temperatures. Here we report a new anode with nanostructured barium oxide/nickel (BaO/Ni) interfaces for low-cost SOFCs, demonstrating high power density and stability in C(3)H(8), CO and gasified carbon fuels at 75...
متن کاملElectrical Performance and Carbon Deposition Differences between the Bi-Layer Interconnector and Conventional Straight Interconnector Solid Oxide Fuel Cell
Carbon deposition considered in a solid oxide fuel cell (SOFC) model may be influenced by the operating voltage, inlet water/methane ratio, working temperature and pressure, inlet molar fraction of fuel and so on. The effects of these parameters in a planar SOFC implementing a novel bi-layer interconnector are not well understood. This paper is focused on the numerical study of carbon depositio...
متن کاملSpatiotemporal simulation of nickel oxide and carbon phases formation in solid oxide fuel cells (SOFC)
The formation of secondary phases in the porous electrodes is a severe mechanism affecting the lifetime of solid oxide fuel cells (SOFC). It can occur via various chemical mechanisms and it has a significant influence on cell performance due to pore clogging and deactivation of active surfaces and triple-phase boundary (TPB). We present a modeling and simulation study of nickel oxide formation ...
متن کاملPreparation of NiO-YSZ/YSZ bi-layers for solid oxide fuel cells by electrophoretic deposition
A simple and cost-effective method, starting with electrophoretic deposition (EPD) on a carbon sheet, has been developed for preparation of a iO-YSZ anode and thin, gas-tight YSZ electrolyte layer on it for use in solid oxide fuel cells (SOFCs). The innovative feature of this approach nables the deposition of anode materials as well as the YSZ electrolyte, which were subsequently co-fired in ai...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sustainable Energy and Fuels
سال: 2021
ISSN: ['2398-4902']
DOI: https://doi.org/10.1039/d0se01914c