Identification of Crack in Reinforced Concrete Beam Subjected to Static Load Using Non-linear Finite Element Analysis
نویسندگان
چکیده
منابع مشابه
Non Linear Finite Element Analysis of Reinforced and Unreinforeced Pavements
In this research a comprehensive finite element program was developed in order to carry out an elasto perfectly plastic analysis of geogrid reinforcement of a model pavement. Qualitative agreement is seen between the numerical results and experiment. The results indicate the influence of geogrid in reduction of vertical deformation of pavements. It is also seen that for strong subgrade, the opt...
متن کاملNon Linear Finite Element Method of Analysis of Reinforced Concrete Deep Beam
ABSTRACT: This paper describes analysis of deep beams subjected to two point loading with three different L/D ratios (1.5, 1.6, 1.71) using Non-linear Finite element method (ANSYS 9.0 software) in order to investigate the stress and strain distribution pattern at mid-section of the beam. In ANSYS 9.0 software, SOLID 65 and LINK 8 element represent concrete and reinforcing steel bars. Non-linear...
متن کاملFinite Element Analysis of Reinforced Concrete Column Under Lateral Load
To serve its purpose a structure must be safe against collapse and serviceable in use. Serviceability requires that deflections be adequately small to keep the cracks within tolerable limits. Although the widely followed ACI Code suggests a detailed method of deflection calculation, it often cannot exactly perceive the actual behavior of a structure. For this purpose, finite element analysis, u...
متن کاملAnalysis of Thin-Walled Steel Sections Filled with Concrete Using Non-Linear Finite Element Method
Being economical and performing well under cyclic loads, steel sections filled with concrete have been widely used in structural buildings. Extensive studies and experiments have been conducted to investigate the influence of different parameters and loadings on the behavior of these structural components. Based on the data available from previous experiments and studies, this paper discusses t...
متن کاملAnalysis of Thin-Walled Steel Sections Filled with Concrete Using Non-Linear Finite Element Method
Being economical and performing well under cyclic loads, steel sections filled with concrete have been widely used in structural buildings. Extensive studies and experiments have been conducted to investigate the influence of different parameters and loadings on the behavior of these structural components. Based on the data available from previous experiments and studies, this paper discusses t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Civil Engineering Journal
سال: 2019
ISSN: 2476-3055
DOI: 10.28991/cej-2019-03091359