Identification of damage fields using kinematic measurements
نویسندگان
چکیده
منابع مشابه
Model-based structural damage identification using vibration measurements
Aalto University, P.O. Box 11000, FI-00076 Aalto www.aalto.fi Author Antti Huhtala Name of the doctoral dissertation Model-based structural damage identification using vibration measurements Publisher School of Science Unit Department of Mathematics and Systems Analysis Series Aalto University publication series DOCTORAL DISSERTATIONS 30/2015 Field of research Mechanics Manuscript submitted 15 ...
متن کاملNew closed-form solution for kinematic parameter identification of a binocular head using point measurements
This paper proposes a new closed-form solution for identifying the kinematic parameters of an active binocular head having four revolute joints and two prismatic joints by using three-dimensional (3-D) point (position) measurements of a calibration point. Since this binocular head is composed of off-the-shelf components, its kinematic parameters are unknown. Therefore, we can not directly apply...
متن کاملDamage identification using inverse methods.
This paper gives an overview of the use of inverse methods in damage detection and location, using measured vibration data. Inverse problems require the use of a model and the identification of uncertain parameters of this model. Damage is often local in nature and although the effect of the loss of stiffness may require only a small number of parameters, the lack of knowledge of the location m...
متن کاملPosition and Orientation Measurements using Magnetoquasistatic Fields
The wireless position tracking problem is of increasing relevance to the society today, owing to applications such as navigation, security, and asset tracking. Despite numerous technological advances, radio based position location systems such as global positioning systems (GPS), ultrawide band (UWB) systems, and radio frequency identification (RFID) systems suffer reduced performance in non-li...
متن کاملDamage identification of structures using second-order approximation of Neumann series expansion
In this paper, a novel approach proposed for structural damage detection from limited number of sensors using extreme learning machine (ELM). As the number of sensors used to measure modal data is normally limited and usually are less than the number of DOFs in the finite element model, the model reduction approach should be used to match with incomplete measured mode shapes. The second-order a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Comptes Rendus Mécanique
سال: 2002
ISSN: 1631-0721
DOI: 10.1016/s1631-0721(02)01524-3