Idling Knock in a Pre-Combustion Type Diesel Engine
نویسندگان
چکیده
منابع مشابه
Real-Time Combustion Parameters Estimation for HCCI-Diesel Engine Based on Knock Sensor Measurement
Future internal combustion engine technologies require an accurate combustion monitoring and control. This can be performed through high frequency recordings of cylinder pressure. However, this solution is limited by the sensor cost and reliability. Another method consist in reconstructing combustion related variables from indirect measurements. In this paper, we propose a combustion indicator ...
متن کاملActive Combustion Control of Diesel HCCI Engine: Combustion Timing
We propose a model based control strategy to adapt the injection settings according to the air path dynamics on a Diesel HCCI engine. This approach complements existing airpath and fuelpath controllers, and aims at accurately controlling the start of combustion. For that purpose, start of injection is adjusted based on a Knock Integral Model and intake manifold conditions. Experimental results ...
متن کاملCombustion Improvement for Reducing Exhaust Emissions in DI Diesel Engine
Multidimensional modelling of open-cycle process of OM355 engine was developed. Calculations for computational mesh were carried out. The results of the model were validated by experimentally measured in-cylinder pressure and the good agreement between calculations and measurements approved the trustworthy of numerical code. Results included pressure, temperature, emission and Rate of heat rel...
متن کاملDiesel Knock Combustion and Its Detection Using Acoustic Emission
This paper presents an experimental investigation into the detection of excessive diesel knock using acoustic emission (AE) signals. Three different dual-fuel diesel engine operating regimes were induced into a compression-ignition (diesel) engine operating on both straight diesel fuel and two different mixtures of fumigated ethanol and diesel. The experimentally induced engine operating regime...
متن کاملA Semi-empirical Model to Predict Diesel Engine Combustion Parameters
To carry out the investigation, a cylinder pressure model was developed based on the position of the crankshaft, engine load, engine speed, and fuel injection time. This model takes into account the maximum number of parameters involved. The accuracy of the model was verified by experimental results. The average error of the cylinder pressure, the average radical of the square of the error of t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of JSME
سال: 1959
ISSN: 0021-3764,1881-1426
DOI: 10.1299/jsme1958.2.175