IGBT model validation for soft-switching applications
نویسندگان
چکیده
منابع مشابه
High Power Soft – switching IGBT DC – DC Converter
A soft-switching topology for high power buck converter is proposed. Zero-current turn-on and zero-voltage turn-off is achieved without auxiliary switches. All active switches in the converter transmit power to the load equally. Converter control is simple despite four active switches. Converter operation is described and DC analysis is carried out. All operation modes are identified. The condi...
متن کاملA High Efficiency Low-Voltage Soft Switching DC–DC Converter for Portable Applications
This paper presents a novel control method to improve the efficiency of low-voltage DC-DC converters at light loads. Pulse Width Modulation (PWM) converters have poor efficiencies at light loads, while pulse frequency modulation (PFM) control is more efficient for the same cases. Switching losses constitute a major portion of the total power loss at light loads. To decrease the switching losses...
متن کاملa high efficiency low-voltage soft switching dc–dc converter for portable applications
this paper presents a novel control method to improve the efficiency of low-voltage dc-dc converters at light loads. pulse width modulation (pwm) converters have poor efficiencies at light loads, while pulse frequency modulation (pfm) control is more efficient for the same cases. switching losses constitute a major portion of the total power loss at light loads. to decrease the switching losses...
متن کاملSoft Switching MBC Controller for MIMO Linear Hybrid Systems
Switching supervisory is the most important section of a feedback control process inMIMO hybrid systems. By choosing a non-compatible controller, system may go tounstable mode or high overshoot response. In this paper, a new method of switchingfor selecting MBC controllers is discussed. Results of the simulation show the MIMO(2-in 2-out) linear hybrid system can be switched stable and low overs...
متن کاملBuck Converter with Soft-Switching Cells for PV Panel Applications
In power conversion of photovoltaic (PV) energy, a hard-switching buck converter always generates some disadvantages. For example, serious electromagnetic interference (EMI), high switching losses, and stresses on an active switch (metal-oxide-semiconductor-field-effect-transistor, MOSFET), and high reverse-recovery losses of a freewheeling diode result in low conversion efficiency. To release ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Industry Applications
سال: 2001
ISSN: 0093-9994
DOI: 10.1109/28.913733