Ignition and Emission Characteristics of Waste Tires Pyrolysis Char Co-Combustion with Peat and Sawdust
نویسندگان
چکیده
The pyrolysis processing of waste tires is a promising technology for obtaining products with high marginality. One the possible methods solid product utilization its combustion energy production, but this complicated by poor reactivity and sulfur emissions. char together more reactive fuels could solve problem. current study devoted to characteristics carbon residue mixed biomass: pine sawdust peat. oxidation in thermal analyzer conditions were found change insignificantly. In contrast, 15 wt% peat additives was decrease ignition delay times realistic at 800 °C 42 78%, respectively, while SO2 emissions also dropped 73 52%, respectively. extra be contained ash form CaS CaSO4. While increasing concentration from 5 have almost no effect, same increase resulted into an proportional times. results obtained used integration mixtures or sector.
منابع مشابه
Vacuum pyrolysis of waste tires with basic additives.
Granules of waste tires were pyrolyzed under vacuum (3.5-10 kPa) conditions, and the effects of temperature and basic additives (Na2CO3, NaOH) on the properties of pyrolysis were thoroughly investigated. It was obvious that with or without basic additives, pyrolysis oil yield increased gradually to a maximum and subsequently decreased with a temperature increase from 450 degrees C to 600 degree...
متن کاملIgnition delay, combustion and emission characteristics of diesel engine fueled with biodiesel
Biodiesels are gaining more importance as a promising alternative energy resource. Engine performance and emission characteristics of unmodified biodiesel fueled diesel engines are highly influenced by its ignition and combustion behavior. This review article presents the literature review on ignition delay (ID), combustion and emission characteristics of biodiesel fueled diesel engine. More th...
متن کاملProperties of Gas and Char from Microwave Pyrolysis of Pine Sawdust
Pine sawdust pyrolysis was carried out respectively using microwave and conventional electrical heating at different temperatures in order to understand the properties of pyrolytic products from microwave pyrolysis of biomass. Less char material was obtained by microwave pyrolysis compared to conventional heating at the same temperature. While comparing the components of the pyrolytic gases, it...
متن کاملPyrolysis Process and Characteristics of Products from Sawdust Briquettes
The pyrolysis of briquettes made from biomass is an available and economic technological route for the production of briquette charcoal, but by-products (tar and gas) cannot be brought into full utilization, leading to the waste of resources and the addition of environmental concerns. Temperature is the most important parameter that affects the distributions and properties of briquette charcoal...
متن کاملThe Effects of Ethanol–gasoline Blend on Performance and Exhaust Emission Characteristics of Spark Ignition Engines
The effects of unleaded gasoline and unleaded gasoline–ethanol blends on engine performance and pollutant emissions were investigated experimentally in a single cylinder, four-stroke spark-ignition engine with variable engine speeds (2600–3500 rpm). Four different blends on a volume basis were applied. These are E0 (0% ethanol + 100% unleaded gasoline), E3 (3% ethanol + 97% unleaded gasoline), ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energies
سال: 2023
ISSN: ['1996-1073']
DOI: https://doi.org/10.3390/en16104038