Ignition phenomena of wood by AC tracking.
نویسندگان
چکیده
منابع مشابه
AC electrokinetic phenomena generated by microelectrode structures.
The field of AC electrokinetics is rapidly growing due to its ability to perform dynamic fluid and particle manipulation on the micro- and nano-scale, which is essential for Lab-on-a-Chip applications. AC electrokinetic phenomena use electric fields to generate forces that act on fluids or suspended particles (including those made of dielectric or biological material) and cause them to move in ...
متن کاملIgnition of Wood-based Materials by Thermal Radiation
Ignition is the initial stage of burning the materials. Consequent flame spread over the materials, heat release rate, fire spread across the rooms, and other issues for building fires all depend on that. Ignition of cellulose materials is commonly classified as smoldering or glowing ignition (self-heating ignition) and flaming ignition including piloted and spontaneous ignition. Numerous studi...
متن کاملAn experimental investigation of iso-octane ignition phenomena
High-speed digital imaging has been used in rapid compression facility (RCF) studies to investigate ignition phenomena of iso-octane/air mixtures. Sequential images were captured for each experiment. The results indicate the existence of two ignition regimes. In one domain, ignition is rapid, typically less than 76 μs, and ignition occurs simultaneously throughout the test volume. In the other ...
متن کاملIgnition Phenomena and Controlled Firing of Reaction-bonded Aluminum Oxide
The reaction-bonded aluminum oxide (RBAO) process utilizes the oxidation of attrition-milled Al/Al2O3/ZrO2 powder compacts, that are heat treated in air, to make alumina-based ceramics. A simultaneous mass and energy balance has been used to model the propagation of the ignition front that has been observed during reaction-bonding. The model is used to determine conditions under which ignition ...
متن کاملHall effect in an AC electric field and related phenomena
Nonlinear Hall effect in an AC electric field and related phenomena. Abstract It has been shown that in metals and semiconductors the joint action of permanent magnetic and AC electric fields leads to arising of DC surface electric current. The physical reason for such a current is due to essentially non-linear dynamics of electronic gas in the surface layer. In adiabatic limit the analytical e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Fundamentals and Materials
سال: 1985
ISSN: 0385-4205,1347-5533
DOI: 10.1541/ieejfms1972.105.573