II. Chemical Sensor Using Acoustic Wave Devices

Simulation of acoustic wave devices using Matlab

A review of the principles and applications of surface acoustic wave (SAW) devices is given. An implementation of a design method for SAW devices using MATLAB is described. Results of a comparison between the proposed simulation technique and experimental test results are

Acoustic Target Tracking Using Tiny Wireless Sensor Devices

With the advancement of MEMS technologies, wireless networks consist of tiny sensor devices hold the promise of revolutionizing sensing in a wide range of application domains because of their flexibility, low cost and ease of deployment. However, the constrained computation power, battery power, storage capacity and communication bandwidth of the tiny devices pose challenging problems in the de...

Surface Acoustic Wave Devices for Harsh Environment

Applications of Surface Acoustic and Shallow Bulk Acoustic Wave Devices

Applications of surface acoustic wave (SA W) and shallow bulk acoustic wave (SBA W) devices are reviewed. SA W-device coverage includes delay lines and filters operating at selected frequencies in the range from about 10 MHz to 11 GHz, modeling with singlecrystal piezoelectrics and layered structures, resonators and lowloss filters, comb filters and multiplexers, antenna duplexers, harmonic dev...

TiO2 based surface acoustic wave gas sensor with modified electrode dimensions for enhanced H2 sensing application

The design and optimization of nanostructure-based surface acoustic wave (SAW) gas sensor is analyzed based on TiO2 sensing layer and modified electrode dimensions. The sensitivity of the gas sensor depends upon the type of sensing layer used and active surface area obtained by varying the aspect ratio. The performance of the sensor is observed from 0.1ppm to 100ppm concentration of ...