Impact Damage Detection in Composite Plates using a Self-diagnostic Electro-Mechanical Impedance-based Structural Health Monitoring System

نویسندگان
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Thermo-Electro Mechanical Impedance based Structural Health Monitoring: Euler- Bernoulli Beam Modeling

In recent years, impedance measurement method by piezoelectric (PZT) wafer activesensor (PWAS) has been widely adopted for non-destructive evaluation (NDE). In this method, theelectrical impedance of a bonded PWAS is used to detect a structural defect. The electro-mechanicalcoupling of PZT materials constructs the original principle of this method. Accordingly, the electricalimpedance of PWAS c...

متن کامل

Electro-Mechanical Impedance Method for Crack Detection in Thin Plates

In recent years, the damage detection with E/M impedance method has gained increased attention. The method uses small-size piezoelectric active sensors intimately bonded to an existing structure, or embedded into a new composite construction. Experimental demonstrations have shown that the real part of the highfrequency impedance spectrum is directly affected by the presence of damage or defect...

متن کامل

Damage Detection in Thin Plates and Aerospace Structures with the Electro-Mechanical Impedance Method

The use of the electro-mechanical (E/M) impedance method for health monitoring of thin plates and aerospace structures is described. As a nondestructive evaluation technology, the E/M impedance method allows us to identify the local dynamics of the structure directly through the E/M impedance signatures of piezoelectric wafer active sensors (PWAS) permanently mounted to the structure. An analyt...

متن کامل

Design of a piezoelectric-based structural health monitoring system for damage detection in composite materials

Cost-effective and reliable damage detection is critical for the utilization of composite materials. This paper presents the conclusions of an experimental and analytical survey of candidate methods for in-situ damage detection in composite structures. Experimental results are presented for the application of modal analysis and Lamb wave techniques to quasi-isotropic graphite/epoxy test specime...

متن کامل

Impedance-based Structural Health Monitoring

1. Introduction The development of a real-time, in-service structural health monitoring and damage detection technique has recently attracted a large number of academic and industrial researchers. The goal of this research is to allow systems and structures to monitor their own integrity while in operation and throughout their lives in order to prevent catastrophic failures and to reduce the co...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Multiscale Modelling

سال: 2015

ISSN: 1756-9737,1756-9745

DOI: 10.1142/s1756973715500134