Impacts of salt concentration on nucleate pool boiling of NaCl solution

نویسندگان

چکیده

Salt solution pool boiling is of great significance in thermal engineering equipment, such as boilers and heat exchangers. Few researchers have been able to draw on systematic research into the impacts salt concentration transfer coefficients. This experimental work aimed understand role dissolved salts performance, which affected by surface wettability bubble dynamics. Pool experiment was conducted within a broad range concentration. The results show two different tendencies for heating surfaces. coefficient enhanced pin–fin while deteriorated bare increased. It indicated that promotes diameter nucleate density ∼13% 9%, respectively, strengthening hydrophobicity surface. Hence, strengthened.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Distribution of Impurities Concentration in Nucleate Boiling

The development of the mathematical model of mass transfer and diffusion process can determine the behavior of dissolved impurities in the flow boiling within viscous sublayer. Application of a new model to calculate the distribution of dissolved impuritiesconcentration within viscous sublayer and estimation of its thickness based on heat conduction layer and evaporation layer (macro-microlayer...

متن کامل

Heat transfer in nucleate pool boiling of multicomponent mixtures

Steady state pool boiling heat transfer coefficients have been obtained experimentally for acetone–isopropanol–water and acetone–MEK (methyl ethyl ketone)–water ternary systems. The data show that, for a given heat flux, the heat transfer coefficients of mixtures are lower than those obtained for pure components constituting the mixture. The measured heat transfer coefficients were compared wit...

متن کامل

Direct Numerical Simulation of Subcooled Nucleate Pool Boiling

With the long-term objective of Critical Heat Flux (CHF) prediction, a Direct Numerical Simulation (DNS) framework for simulation of subcooled and saturated nucleate pool boiling is developed. One case of saturated, and three cases of subcooled boiling at different subcooling levels are simulated. Grid refinement study is also reported. Both boiling and condensation phenomena can be computed si...

متن کامل

Momentum effects in steady nucleate pool boiling during microgravity.

Pool boiling experiments were conducted in microgravity on five space shuttle flights, using a flat plate heater consisting of a semitransparent thin gold film deposited on a quartz substrate that also acted as a resistance thermometer. The test fluid was R-113, and the vapor bubble behavior at the heater surface was photographed from beneath as well as from the side. Each flight consisted of a...

متن کامل

Roughness Effects on Nucleate Pool Boiling of R-113 on Horizontal Circular Copper Surfaces

The present paper is an experimental investigation of roughness effects on nucleate pool boiling of refrigerant R113 on horizontal circular copper surfaces. The copper samples were treated by different sand paper grit sizes to achieve different surface roughness. The average surface roughness of the four samples was 0.901, 0.735, 0.65, and 0.09, respectively. The experiments were performed in t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: AIP Advances

سال: 2023

ISSN: ['2158-3226']

DOI: https://doi.org/10.1063/5.0140825