Impeller Radial Velocity and Air Flow Rate Influence on Copper Rougher Flotation Recovery
نویسندگان
چکیده
منابع مشابه
Effect of frother type and operational parameters on nano bubble flotation of quartz coarse particles
In this work, the effects of the types of frother (MIBC, pine oil, and A65) and operational parameters (impeller speed and air flow rate) on the flotation of quartz coarse particles was investigated using nano bubbles (NBs). Quartz particles of the size of -425+106 mm and three types of frother were used for the flotation experiments. Also the impeller speed was 600 to 1300 rpm, and the air flo...
متن کاملThe Effect of Superficial Feed Velocity on the Column Flotation Recovery in Comparison with the Conventional Flotation Cells
Flotation is the most important process for concentrating mineral ores. This process may occur in any vessel such as column flotation, which has been used widely during the last decade and the conventional flotation cells. The effect of superficial feed velocity on the copper recovery was investigated using pilot-scale column flotation of "Sarcheshmeh Capper Complex". The results were compa...
متن کاملCfd Model of a Self-aerating Flotation Cell
The effect of impeller speed on the air flow in a selfaerated Denver laboratory flotation cell was investigated using computational modelling. Air is induced into the slurry by the impeller’s rotating action. The rate of air flow is determined by the suction pressure created by the impeller, the hydrostatic head of the slurry and the frictional losses along the delivery shaft from the inlet val...
متن کاملDetermination of the difference in recovery and kinetics of various size fractions of gilsonite in rougher and cleaner flotation processes
Kinetic models are the most important tools for the prediction and evaluation of the flotation circuits performance. In order to determine the kinetic order and rate of flotation of a Gilsonite sample, flotation experiments were conducted using the combination of Gasoline-Pine Oil, and one test without any collector and frother. The pulp density was 10% and the experiments were carried out in b...
متن کاملRecovery of Copper from Copper Slag and Copper Slag Flotation Tailings by Oxidative Leaching
Copper smelter slag and copper smelter slag flotation tailings were leached using sulphuric acid solutions, without or with the addition of either ferric sulphate or hydrogen peroxide. Copper extraction from the slag was typically found to be twice as high as that from the slag flotation tailings. Hydrogen peroxide was determined to be the best lixiviant. Thus, copper and iron extractions were ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Civil and Environmental Engineering Reports
سال: 2018
ISSN: 2450-8594,2080-5187
DOI: 10.2478/ceer-2018-0004